[arm-allstar] Duplex=0 - messages still possible

[John Huggins]

Tom KD7LXL and Stephen K1LNX,

Since we three have the same basic setup (SCOM 7330, USB Sound Adapter and
HAMVOIP) I wonder if you have seen a case where an automatic announcement
from HAMVOIP duing someone's RF-side QSO causes the audio stream to an IAX
client to mute. I sent a separate message earlier with many more details,
but that's the crux of it.

Thanks for any insights.

John, kx4o

On Sun, Jul 30, 2017 at 9:13 PM, "Stephen - K1LNX via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have the same setup (SCOM 7330 with a pair of CDM's on port 1, AllStar on
> port 2) with duplex=0/linktolink=yes and localplay does indeed work. I use
> it all the time for newsline and other announcements and such that I don't
> want to send out globally, globalplay exhibits the same behavior.
>
> 73
> Stephen
> K1LNX
>
> > On Sun, Jul 30, 2017 at 8:27 PM, "Tom Hayward via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > On Sun, Jul 30, 2017 at 4:10 PM, "John Huggins via arm-allstar"
> > > <arm-allstar at hamvoip.org> wrote:
> > > > Hello,
> > > >
> > > > ; duplex=0 - Half duplex with no telemetry
> > > > ; tones or hang time. Special Case: Full
> > > > ; duplex if linktolink is set to yes.
> > > > ; This mode is preferred when interfacing
> > > > ; with an external multiport repeater controller.
> > > >
> > > > So if I use duplex=0 on a port of my SCOM (working well for Echolink
> > > > by the way) are there any reasons I cannot have the Allstar system
> > > > manage and transmit voice messages out the repeater using the cron
> > > > system?
> > >
> > > We have an SCOM 7330 with Asterisk attached to one port and these
> > > app_rpt settings:
> > >
> > > duplex=0
> > > linktolink = yes
> > >
> > > We don't hear courtesy tones or the IDer, but the hourly time
> > > announcement triggered via cron still plays.
> > >
> > > Tom KD7LXL
> > > _______________________________________________
> <http://hamvoip.org>
>