[arm-allstar] Fwd: Can Not Connect To Node.

[Doug Crompton]

David,
 Thanks for the hint. I looked in /var/log/asterisk/messages and saw an
error message for line 1 in rpt.conf . Sure enough, a wayward “w” found
it’s way in there somehow when I changed the duplex parm. I probably failed
to press hard enough on the CTRL key along with the “w” key in order to
find the duplex parm with the “Where is” command.

Everything running well again. :-D

73
Steve
KD9AER

> On Aug 2, 2017, at 12:50 PM, David McGough <kb4fxc at inttek.net> wrote:
>
>
> Hi Steve,
>
> This is likely some kind of basic mis-configuration...Something like a bad
> node stanza or a syntax error in a config file of some type.
>
> I'll have a little time to help on Thursday, I've been running flat out so
> far this week.
>
> 73, David KB4FXC
>
>
>
>
> On Wed, 2 Aug 2017, Steve wrote:
>
>> Hi David,
>> This morning i booted the RPi and waited 5 minutes. At this point the
> green light on the RPi was steadily flashing the "heartbeat" pattern.
> Then, when i tried to sign on through the Android app, i got the same
> error - "too soon".
>>
>> I also noticed that the RPi did not transmit it's ip address either
> like it always does after booting up.
>>
>> 73
>> Steve
>> KD9AER
>>
>>> On Aug 1, 2017, at 9:33 PM, David McGough <kb4fxc at inttek.net> wrote:
>>>
>>>
>>> Hi Steve,
>>>
>>> This error typically indicates that the system time has "jumped" in a
>>> negative direction; either that or you're trying to connect immediately
as
>>> you start the asterisk software???
>>>
>>> I *think* I got all the time-of-day jumping issues resolved many moons
>>> ago...
>>>
>>> Please start asterisk and give it a few seconds to settle down and then
>>> try connecting via echolink....Or, if asterisk was already running for a
>>> period of time and you got this error, I'll take another look through
the
>>> code for time-of-day delta issues.
>>>
>>>
>>> 73, David KB4FXC
>>>
>>>
>>>
>>> On Tue, 1 Aug 2017, "Stephen Grob via arm-allstar" wrote:
>>>
>>>> My node has been running well for a couple days.
>>>
>>> All of a sudden I can’t connect to it because it refuses the
connection.
>>>
>>> I watched the CLI client for close and got this:
>>> Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017,
Copyright (C) 1999 - 2017 HamVoIP.org and others.
>>> Created by Mark Spencer <markster at digium.com>
>>> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
for details.
>>> This is free software, with components licensed under the GNU General
Public
>>> License version 2 and other licenses; you are welcome to redistribute
it under
>>> certain conditions. Type 'core show license' for details.
>>> ============================================================
=============
>>> Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017
currently running on allstar (pid = 385)
>>> Verbosity was 3 and is now 4
>>>   -- new CALL=KD9AER,ip=107.23.109.134,name=        Steve
>>>   -- Executing [46087 at radio-secure:1] Rpt("echolink/el0-3", "46087") in
new stack
>>> [Aug  1 15:31:29] NOTICE[1299]: app_rpt.c:20643 rpt_exec: Node 46087
rejecting call: too soon!
>>>   -- Received OK from Echolink server server1.echolink.org
>>>   -- Directory pgm done downloading(partial,compressed), 445 records
>>> == Spawn extension (radio-secure, 46087, 1) exited non-zero on
'echolink/el0-3'
>>>   -- Received OK from Echolink server server1.echolink.org
>>>   -- new CALL=KD9AER,ip=107.23.109.134,name=        Steve
>>>   -- Executing [46087 at radio-secure:1] Rpt("echolink/el0-4", "46087") in
new stack
>>> [Aug  1 15:31:32] NOTICE[1300]: app_rpt.c:20643 rpt_exec: Node 46087
rejecting call: too soon!
>>>   -- Directory pgm done downloading(partial,compressed), 3 records
>>> == Spawn extension (radio-secure, 46087, 1) exited non-zero on
'echolink/el0-4'
>>>   -- Received OK from Echolink server server1.echolink.org
>>>   -- Directory pgm done downloading(partial,compressed), 15 records
>>> [Aug  1 15:31:36] ERROR[425]: chan_echolink.c:2037 sendcmd: connect()
failed to connect to the Echolink server server5.echolink.org
>>>   -- Received OK from Echolink server server3.echolink.org
>>> allstar*CLI>
>>>
>>> 73
>>> Steve
>>> KD9AER
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>>>
>>
>>
>>
>
>