[arm-allstar] RX receive only on a permanent transceive link after power fail
LaRoy McCann
lmccann at dtisp.com
Wed Aug 2 16:26:01 EST 2017
*I forgot to add the logfile messages.
I see in here it had a problem connecting to the hub node 41741.
*/01:08:42] NOTICE[391] dnsmgr.c: Managed DNS entries will be refreshed
every 300 seconds.
[Aug 2 01:08:42] NOTICE[391] cdr.c: CDR simple logging enabled.
[Aug 2 01:08:42] NOTICE[391] loader.c: 129 modules will be loaded.
[Aug 2 01:08:42] WARNING[391] res_config_pgsql.c: Unable to load config
res_pgsql.conf
[Aug 2 01:08:42] ERROR[391] codec_dahdi.c: Failed to open
/dev/dahdi/transcode: No such file or directory
[Aug 2 01:08:42] WARNING[391] cdr_pgsql.c: Unable to load config for
PostgreSQL CDR's: cdr_pgsql.conf
[Aug 2 01:08:42] ERROR[391] chan_voter.c: Unable to load config voter.conf
[Aug 2 01:08:42] NOTICE[391] chan_irlp.c: Unable to load config irlp.conf
[Aug 2 01:08:42] WARNING[391] cdr_odbc.c: cdr_odbc: Unable to load
config for ODBC CDR's: cdr_odbc.conf
[Aug 2 01:08:42] NOTICE[391] app_radbridge.c: Unable to open radio
bridging configuration rpt.conf. Radio Bridging disabled.
[Aug 2 01:08:42] NOTICE[391] pbx_ael.c: Starting AEL load process.
[Aug 2 01:08:42] NOTICE[391] pbx_ael.c: AEL load process: calculated
config file name '/usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael'.
[Aug 2 01:08:42] NOTICE[391] pbx_ael.c: File
/usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael not found; AEL
declining load
[Aug 2 01:08:42] WARNING[391] app_festival.c: No such configuration
file festival.conf
[Aug 2 01:08:43] NOTICE[391] chan_usbradio.c: Unable to load config
usbradio.conf
[Aug 2 01:08:43] NOTICE[391] app_queue.c: No call queueing config file
(queues.conf), so no call queues
[Aug 2 01:08:43] NOTICE[391] func_odbc.c: Unable to load config for
func_odbc: func_odbc.conf
[Aug 2 01:08:43] NOTICE[391] chan_mgcp.c: Unable to load config
mgcp.conf, MGCP disabled
[Aug 2 01:08:43] NOTICE[391] chan_skinny.c: Unable to load config
skinny.conf, Skinny disabled
[Aug 2 01:08:43] WARNING[391] pbx_spool.c: Unable to create queue
directory /var/spool/asterisk/outgoing -- outgoing spool disabled
[Aug 2 01:08:43] WARNING[391] cdr_custom.c: Failed to load
configuration file. Module not activated.
[Aug 2 01:08:43] WARNING[391] cdr_csv.c: unable to load config: cdr.conf
[Aug 2 01:08:43] NOTICE[391] chan_agent.c: No agent configuration found
-- agent support disabled
[Aug 2 01:08:43] NOTICE[391] chan_simple2.c: Unable to load config
simple2.conf
[Aug 2 01:08:43] ERROR[391] chan_iopipe.c: Unable to load config
iopipe.conf
[Aug 2 01:08:43] ERROR[391] chan_echolink.c: Unable to load config
echolink.conf
[Aug 2 01:08:43] NOTICE[410] app_rpt.c: Normal Repeater Init 41859
[Aug 2 01:08:43] NOTICE[410] app_rpt.c: Normal Repeater Init 1999
[Aug 2 01:08:43] NOTICE[427] chan_simpleusb.c: Assigned USB device
1-1.5:1.0 to simpleusb channel usb
[Aug 2 01:08:43] WARNING[427] chan_simpleusb.c: Loaded parameters from
simpleusb_tune_usb.conf for device usb .
[Aug 2 01:08:43] WARNING[425] chan_simpleusb.c: Possibly stuck USB read
channel. [usb]
[Aug 2 01:08:43] WARNING[425] chan_simpleusb.c: Nope, USB read channel
[usb] wasn't stuck after all.
[Aug 2 01:08:52] NOTICE[412] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:08:54] WARNING[449] file.c: File /tmp/ip does not exist in
any format
[Aug 2 01:08:54] WARNING[449] file.c: Unable to open /tmp/ip (format
0x44 (ulaw|slin)): No such file or directory
[Aug 2 01:08:54] WARNING[449] app_rpt.c: ast_streamfile failed on
DAHDI/pseudo-1147486313
[Aug 2 01:08:58] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:02] NOTICE[416] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:08] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:12] NOTICE[412] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:18] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:22] NOTICE[418] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:28] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:32] NOTICE[414] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:38] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:42] NOTICE[411] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:48] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:09:52] NOTICE[417] chan_iax2.c: Auto-congesting call due to
slow response
[Aug 2 01:09:58] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:10:06] WARNING[425] app_rpt.c: Reconnect Attempt to 41741 in
process
[Aug 2 01:10:23] NOTICE[420] dnsmgr.c: host 'register.allstarlink.org'
changed from 0.0.0.0 to 67.215.233.178/
On 8/2/2017 3:30 PM, "LaRoy McCann via arm-allstar" wrote:
> Sorry for the long post but I am trying to post all pertinent data for
> my problem.
>
> I have a hub (node 41741) with a couple of other full duplex repeater
> nodes connected to it full time.
> One of the full duplex repeaters (node 41859) will transmit audio from
> the hub, the hub is not receiving any audio or key-up status from node
> 41859. It is like node 41859 is in receive only mode. The repeater on
> node 41859 works correctly.
> This happened last night after a power failure.
>
> I have Supermon running on the hub. It is at www.nearlug.org. It
> shows all connected nodes to be in transceive mode. It shows that the
> hub has never received anything from node 41859.
>
> The other 2 full duplex repeaters (nodes 41855 and 47857) work ok
> (transcieve mode).
>
> I have not rebooted any nodes yet as I would like to find out why this
> happened. It has happened in the past a couple of times.
>
>
> *Here is some of the hub's rpt.conf file.*
> /[nodes]//
> //; Note, if you are using automatic updates for allstar link nodes,//
> //; no allstar link nodes should be defined here. Only place a
> definition//
> //; for your local (within your LAN) nodes, and private (off of allstar//
> //; link) nodes here.//
> //
> //;41741 = radio at 127.0.0.1/41741,NONE//
> //1999 = radio at 127.0.0.1/1999,NONE//
> //41741 = radio at 96.43.56.40/41741,NONE ; This hub//
> //41855 = radio at 96.43.56.211/41855,NONE ; 146.835//
> //41856 = radio at 96.43.59.15/41856,NONE ; 444.525//
> //41857 = radio at 96.43.56.43/41857,NONE ; 147.240//
> //41858 = radio at 96.43.56.30/41858,NONE ; 146.955//
> //41859 = radio at 96.43.56.30/41859,NONE ; 443.500//
> //45421 = radio at 96.43.56.42/45421,NONE ; 146.610
>
> /
>
> *Here is some of the repeater node's (41859) rpt.conf file.*
> /[nodes]
> ; Note, if you are using automatic updates for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local (within your LAN) nodes, and private (off of allstar
> ; link) nodes here.
>
> 41859 = radio at 127.0.0.1/41859,NONE
> 1999 = radio at 127.0.0.1/1999,NONE
> 41741 = radio at 96.43.56.40/41741,NONE
>
> /*This is the startup macro to connect 41859 to the hub (41741).*
> /startup_macro = *7341741
>
> /
> *Tcpdump from the hub shows traffic between it and node 41859.**
> *
> /[root at k5tw-41741 http]# tcpdump -i eth0 -vv host 96.43.56.30
> tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size
> 262144 bytes
> 13:11:30.265911 IP (tos 0x1e,ECT(0), ttl 64, id 55826, offset 0, flags
> [none], proto UDP (17), length 40)
> www.nearlug.org.iax > 96.43.56.30.iax: [bad udp cksum 0x30c2 ->
> 0x59ab!] UDP, length 12
> 13:11:30.266703 IP (tos 0x1e,ECT(0), ttl 64, id 36616, offset 0, flags
> [none], proto UDP (17), length 40)
> 96.43.56.30.iax > www.nearlug.org.iax: [udp sum ok] UDP, length 12
> 13:11:30.267109 IP (tos 0x1e,ECT(0), ttl 64, id 55827, offset 0, flags
> [none], proto UDP (17), length 40)
> www.nearlug.org.iax > 96.43.56.30.iax: [bad udp cksum 0x30c2 ->
> 0x58b1!] UDP, length 12
>
> /*Tcpdump from node 41859 shows traffic between it and the hub node
> 41471.*
>
> /[root at ni5a-41859 asterisk]# tcpdump -i eth0 -vv host 96.43.56.40
> tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size
> 262144 bytes
> 13:24:57.840625 IP (tos 0x1e,ECT(0), ttl 64, id 12091, offset 0, flags
> [none], proto UDP (17), length 43)
> ni5a-41859.iax > www.nearlug.org.iax: [bad udp cksum 0x30c5 ->
> 0x450c!] UDP, length 15
> 13:24:57.841352 IP (tos 0x1e,ECT(0), ttl 64, id 31450, offset 0, flags
> [none], proto UDP (17), length 40)
> www.nearlug.org.iax > ni5a-41859.iax: [udp sum ok] UDP, length 12
> 13:24:58.051310 IP (tos 0x1e,ECT(0), ttl 64, id 12109, offset 0, flags
> [none], proto UDP (17), length 40)
> ni5a-41859.iax > www.nearlug.org.iax: [bad udp cksum 0x30c2 ->
> 0x9054!] UDP, length 12
> 13:24:58.052087 IP (tos 0x1e,ECT(0), ttl 64, id 31469, offset 0, flags
> [none], proto UDP (17), length 40)
> www.nearlug.org.iax > ni5a-41859.iax: [udp sum ok] UDP, length 12
> 13:24:58.052590 IP (tos 0x1e,ECT(0), ttl 64, id 12110, offset 0, flags
> [none], proto UDP (17), length 40)
>
> /*Core show channels from the hub shows
> */k5tw-41741*CLI> core show channels
> Channel Location State Application(Data)
> DAHDI/pseudo-3157682 s at default:1 Rsrvd (None)
> IAX2/96.43.56.211:45 41741 at radio-secure:1 Up (None)
> DAHDI/pseudo-1205868 s at default:1 Rsrvd (None)
> IAX2/173.218.128.149 41741 at radio-secure:1 Up (None)
> DAHDI/pseudo-2063236 s at default:1 Rsrvd (None)
> IAX2/96.43.56.30:456 41741 at radio-secure:1 Up (None)
> DAHDI/pseudo-9198138 s at default:1 Rsrvd (None)/
> *
> Core show channels from node 41859 shows
> */ni5a-41859*CLI> core show channels
> Channel Location State Application(Data)
> DAHDI/pseudo-9258142 s at default:1 Rsrvd (None)
> IAX2/96.43.56.40:456 (None) Up Apprpt((Remote Rx))
> DAHDI/pseudo-2495954 s at default:1 Rsrvd (None)
>
>
> /
>
> In posting the above excerpts from rpt.conf for node 41859, I noticed
> that the ip address is still set to the loopback address.
> Could this be a possible cause? It has been working.
>
>
> Also, the configuration for node 41859 and the hub node 41741 is a new
> build (3 weeks old) of the latest V1.5. I know they have been
> rebooted since the initial install with no problems.
>
>
> The tcpdump data shows traffic between the nodes but it also shows bad
> checksums with the data.
> I think the bad checksum may not be related as the same tcpdump
> between the hub and one of the nodes that works also shows bad
> checksum data.
>
> In looking at CLI> core show channels, it looks like node 41589 is
> actually RX only. Don't know how that would happen since the startup
> macro does a *7341741 which should be a permanent transceive link.
>
>
> LaRoy K5TW
>
> //
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
More information about the arm-allstar
mailing list