[arm-allstar] AutoSky, A Skywarn script for hamvoip

[Doug Crompton]

Justin,

 The "lead-in" character for Allstar is '*'   This can be changed to any
character in rpt.conf BUT whatever it is changed to cannot be part of the
remaining sequence. So you could change it to A or B or C or D on DTMF so
everything would then be  preceded by A - A1234 etc. Theoretically you
could change it to say a '%' symbol but then DTMF would not work while you
could command with the client.

So the answer is NO you cannot just type 1234 if that is what the function
is defined as. Also you cannot define codes that are already defined or
within the range of already defined. The 8xx, 9xx are typically user
defined.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Apr 19, 2017 at 8:11 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
> Is there any way to disable/enable AutoSky using a DTMF sequence that
> doesn't begin with *?
> For example, a 4 digit DTMF code like 1234.
>
> I'm not sure how to remove the leading * as a requirement.
>
> Thanks,
> Justin
> NV8Q
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>