[arm-allstar] Is there a way to use both L & R channels, on a modded fob?

[Doug Crompton]

Yes, both output channels can be used. They will have the same audio
content though so not sure if that suits what you want to do. The levels
can be set independently in the simpleusb-tune-menu setup.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Apr 17, 2017 at 2:33 AM, "kd4ont via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I'm wanting to build a hybrid node, half radioless, half rf. In most of
> Peter's videos, his kits, that have a setup kinda similar to what I want to
> do, have two fobs and nodes in one box for both rf and dtmf mic.
> I haven't gotten to the experience and experimentation level yet to
> determine if both channels of one fob can be used simultaneously. Some may
> wonder why anyone might want to do this, but I have my odd reasons for my
> project. This would enable two ops to use one node simultaneously and the
> audio would mix. Kill two birds with one stone and use less hardware,
> setup, and linking two nodes together.
> I sometimes think out of the box and try to see if hardware can do things
> a little different than it would be normally used. I know this feature
> would not be wanted by most node owners, but I'm trying to push the limits
> by introducing new ideas.
> I understand that there will will be needed more level adjustments to the
> circuit, one for rf, one for mic, before it needs fine tuning with usb tune.
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org