[arm-allstar] tx_timeout time

[David McGough]

Hi,

Interesting...I'm investigating this issue.

73, David KB4FXC

On Thu, 13 Apr 2017, "Steve Agee via arm-allstar" wrote:

> Yes. I've found as a "rough" estimate, take the time you want then 
multiply by .75 and set to that actual value.

N5ZUA

On 4/13/2017 1:37 PM, "ssedgwick via arm-allstar" wrote:
> When I set the tx_timeout in the rpt-conf to 140 seconds and then measure the actual timeout time, it measures approx. 195 seconds.  I was wondering if it is normal to see this type of difference in the setting and actual timeout time?
>
> To measure the time, I have two nodes connected together and simply key one node until the second node I set the time to 140 seconds times out.  Maybe that is not the correct way to make the measure, or maybe I have something else set wrong.   Any idea’s?
>
> Using V1.5
>
> Thanks
> 73
> Steve_WB8GRS
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org