[arm-allstar] USB reset issue

[Doug Crompton]

Hard to say exactly what this is. It could be a bad FOB or cable. What FOB are you using? Did you modify the FOB? You are using carrierfrom=usb in simpleusb.conf??? That is what the 888 requires. Are you getting a courtesy tone when you unkey? Have you changed anything else parameter wise? What version of the code are you using?  
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Fri, 16 Sep 2016 21:30:34 -0700
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] USB reset issue
From: arm-allstar at hamvoip.org
CC: bryan at k6cbr.us

Hello all,
I have a new node up and am using an 888 with modified FOB.
Just received the radio and have it online tonight, but notice after about 20 mins of use, I was missing parts of the conversation.
Radio stayed online and not was solid....not packet loss. When I logged into the console to see what was happening, I saw this:








[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]
  == Set device 1-1.4:1.0 to usb
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.
    -- Hungup 'DAHDI/pseudo-203191'
    -- Hungup 'DAHDI/pseudo-141004'
    -- Hungup 'DAHDI/pseudo-534356'
  == Set device 1-1.4:1.0 to usb
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read: Possibly stuck USB read channel. [usb]
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read: Nope, USB read channel [usb] wasn't stuck after all.
    -- Hungup 'DAHDI/pseudo-429511028'

I get about 10 seconds of sound then a usb reset.  Repeating messages.
I have performed another usb config, to check settings.. but same result.
I can hear the node and I can transmit clearly when connected.
(If I should be asking for help on a different list for this type of issue, please inform me of that list name, thank you.)
-- 
Bryan aka K6CBRwww.k6cbr.usQRZ43913

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160917/e0ebc715/attachment-0001.html>