[arm-allstar] Same server nodes can't connect
wade
wadeo at charter.net
Mon Sep 12 19:00:33 EST 2016
Doug,
I was wondering if you have had the time to log in and check out my
issue yet? I sent you a couple of emails to your cromton.com address one
from each of my own email addresses. I don't know if may they got caught
in a spam filter or something.
Anyway just checking..
Wade
KC0MLT
On 08/31/2016 02:51 PM, Doug Crompton via arm-allstar wrote:
> iax.conf should only have registration entries for the nodes that are
> on that server. Same with extensions.
>
> Question - are you able to ping from each server to the other and get
> good responses? Can you ssh from each server to the other?
>
> If you send me a personal email with your node numbers and login
> passwords for these servers and the port if you have changed it from
> 222 I would be glad to log in and take a look and see what I find.
> Also send me your phone number if possible.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> To: arm-allstar at hamvoip.org
> Date: Wed, 31 Aug 2016 13:44:16 -0500
> Subject: Re: [arm-allstar] Same server nodes can't connect
> From: arm-allstar at hamvoip.org
> CC: wadeo at charter.net
>
> Ok so I have the port defined and matched in iax.conf and on
> allstarlink.org correctly, here is what the CLI puts out as I try from
> each node.
>
>
>
> /kc0mlt*CLI> rpt fun 28757 *340509//
> // -- Hungup 'DAHDI/pseudo-1590956738'//
> //[Aug 31 13:30:18] NOTICE[3053]: chan_iax2.c:4087 __auto_congest:
> Auto-congesting call due to slow response//
> // -- Hungup 'IAX2/127.0.0.1:4569-3215'//
> // -- Hungup 'DAHDI/pseudo-1461208458'//
> // -- <DAHDI/pseudo-605829635> Playing 'rpt/node' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'digits/4' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'digits/0' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'digits/5' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'digits/0' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'digits/9' (language 'en')//
> // -- <DAHDI/pseudo-605829635> Playing 'rpt/connection_failed'
> (language 'en')//
> // -- Hungup 'DAHDI/pseudo-605829635'//
> //kc0mlt*CLI> rpt fun 40509 *328757//
> // -- Hungup 'DAHDI/pseudo-2048896914'//
> //[Aug 31 13:30:47] NOTICE[3057]: chan_iax2.c:4087 __auto_congest:
> Auto-congesting call due to slow response//
> // -- Hungup 'IAX2/127.0.0.1:4569-10731'//
> // -- Hungup 'DAHDI/pseudo-809931732'//
> // -- <DAHDI/pseudo-1497001609> Playing 'rpt/node' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'digits/2' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'digits/8' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'digits/7' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'digits/5' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'digits/7' (language 'en')//
> // -- <DAHDI/pseudo-1497001609> Playing 'rpt/connection_failed'
> (language 'en')//
> // -- Hungup 'DAHDI/pseudo-1497001609'//
> //kc0mlt*CLI> /
>
> In iax.conf on the Pi there is only one entry for the 40509 node at
> the beginning. Do I need to copy and paste in a segment for the 28757
> node (and of course modify the node and PW parts)?
>
>
> Wade
>
>
>
> On 08/31/2016 08:06 AM, Doug Crompton via arm-allstar wrote:
>
> Wade,
>
> - 4569 is the default port so you don't have to enter that port
> unless you want to for consistency.
>
> - make sure your port definition in iax.conf and that servers
> port at allstarlink.org match for each server. IP address in
> iax.conf should be 0.0.0.0 (default) and no IP address at
> allstarlink.org - should be default DHCP
>
> - nodes entry at each server for itself - 127.0.0.1 and the other
> servers IP and its port
>
> What kind of message(s) are you getting in the client at each end
> when you attempt the failed connect? Do you have codecs that match
> on each server?
>
> asterisk -rvvv and look for messages at connect attempt.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> Date: Wed, 31 Aug 2016 02:32:36 -0500
> Subject: Re: [arm-allstar] Same server nodes can't connect
> From: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> CC: wadeo at charter.net <mailto:wadeo at charter.net>
>
> Yep, I have followed that sheet. Here is what the Pi has in the
> rpt.conf file towards the bottom.. (xxxx = port assigned)
> 40509 = radio at 127.0.0.1/40509,NONE <mailto:radio at 127.0.0.1/40509,NONE>
> 28757 = radio at 127.0.0.1/28757,NONE <mailto:radio at 127.0.0.1/28757,NONE>
> 40508 = radio at 192.168.1.105:XXXX/40508,NONE
> <mailto:radio at 192.168.1.105:XXXX/40508,NONE>
> Of course the Acid server is just the opposite with the
> appropriate port entered. I can't figure it out.. Did something
> corrupt possibly?? Am I needing to do a fresh install from the
> card? Is there any other file I should be looking at for this?
>
>
> Wade
>
>
>
> On 08/30/2016 10:12 PM, Doug Crompton via arm-allstar wrote:
>
> There has been a howto about this on the hamvoip.org web site
> for a long time.....
>
> https://www.hamvoip.org/multi-server%20howto.pdf
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> > To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > Date: Tue, 30 Aug 2016 20:22:46 -0500
> > Subject: [arm-allstar] Same server nodes can't connect
> > From: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > CC: wadeo at charter.net <mailto:wadeo at charter.net>
> >
> > Good evening all,
> >
> >
> > Today I moved one of my nodes from an old ACID server in the
> other room
> > to the Pi I have in my shack. The Pi now has 2 nodes on it
> and the ACID
> > machine only has 1. After following the documentation online
> for setting
> > up a second node on the Pi I am having an issue. The 2 nodes
> on the Pi
> > can not connect to each other. They can both connect to the
> ACID server
> > / node and to any other node anywhere in the world, just not
> to each
> > other. Apparently there is something I missed and for the
> life of me
> > can't think of anything else to try here.
> >
> > Yes, I did make the appropriate changes on the AllStar
> website and I do
> > have the severs on different ports with correct forwarding
> and all that.
> > Another node here in town can connect to any node of mine as
> one would
> > expect. This seems to be something small so I have probably
> overlooked
> > it somewhere.
> >
> >
> > Thanks in advance!
> >
> > Wade
> >
> > KC0MLT
> >
> >
> > (28757, 40509 RPi nodes)
> >
> > (40508 ACID node)
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page -http://hamvoip.org
>
>
>
> _______________________________________________ arm-allstar
> mailing list arm-allstar at hamvoip.org
> <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page -http://hamvoip.org
>
>
>
> _______________________________________________ arm-allstar mailing
> list arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit
> the BBB and RPi2 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160912/cc2d54ea/attachment-0001.html>
More information about the arm-allstar
mailing list