[arm-allstar] RPi3 No boot

[Doug Crompton]

All the setup is explained at hamvoip.org. This is the place you should be
referring to. There is a setup howto there and other information. The node
number is your assigned node number from allstarlink.org - You need to get
a node number there and there will also be a 6 digit password from there
that you need to use in the setup.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Oct 3, 2016 at 3:19 PM, Danny de Bont via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> Allrighty ... I got the network sorted out. It was a faulty network cable.
>
> I SSH'ed into the Pi. It is running the firsttime script. It asked me to
> change the root password, which I did.
>
> Next question is:
> "Enter Node Number:"
>
> Yes, I downloaded the RPi2/3 image from hamvoip.org.
>
> I am not sure what I must enter as the node number. I am confused in which
> instructions I should follow. The instructions at www.allstarlink.org or
> www.hamvoip.org. Whenever I search for something concerning AllStar I end
> up at www.allstarlink.org.
>
> So, my apologies if I am a pain in the butt, but please understand where I
> am coming from. On www.hamvoip.org, there is no mention of node numbers
> to choose from in the "First communications with the BBB or RPi2" section
> or the following sections.
>
> Even though it would appear as if I am pedantic or not reading
> instructions or not searching on Google it is not so.
>
> So ... what do I enter for "Enter Node Number"? ...
>
> Danny
> ZS6XOX
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20161003/23f210d2/attachment.html>