[arm-allstar] Echolink Problems

[James R. Pilgram]

Roland, 
Is 5198 and 5199 a single line entry or a 2 line entry . Just had that very problem with Alex's modem. 

Jim NH6HI 


  Original Message  
From: arm-allstar at hamvoip.org
Sent: November 19, 2016 7:05 AM
To: arm-allstar at hamvoip.org
Reply-to: arm-allstar at hamvoip.org
Cc: rolandksmith at gmail.com
Subject: [arm-allstar] Echolink Problems

I'm trying to get echolink working on node 42287. I have an RF node 42284
and a "conference" node 42287. My plan is to activate echolink on 42287 and
then connect from 42284 when I want echolink connectivity.

I've built the config file echolink.conf as follows: (password is x'd out,
otherwise everything else is exactly as configured):

[el0]
confmode=no
call=K7OJL-L
pwd=xxxxxxx
name=Roland
qth=Hauula, HI
email=rolandksmith at gmail.com
maxstns=20
rtcptimeout=10
node=499821
recfile=/tmp/recorded.gsm
astnode=42287
context=radio-secure
server1=server1.echolink.org
server2=server5.echolink.org
server3=server3.echolink.org
;naeast.echolink.org
;nasouth.echolink.org
;servers.echolink.org
;backup.echolink.org
; Change following setting to your parameters
freq=147.495
tone=100.0
lat=21.618438
lon=-157.917803
power=5
height=0
gain=3
dir=0
;deny=
;permit=

When I restart asterisk, the following shows up in asterisk:

[Nov 19 05:31:52] ERROR[1286]: chan_echolink.c:2341 do_el_directory: Unable
to connect to directory server server5.echolink.org

[Nov 19 05:31:52] ERROR[1286]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server3.echolink.org

[Nov 19 05:32:12] ERROR[1286]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server1.echolink.org

[Nov 19 05:34:38] ERROR[1286]: chan_echolink.c:2143 sendcmd: connect()
failed to connect to the Echolink server server5.echolink.org

... repeated

[Nov 19 05:36:46] ERROR[1286]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server3.echolink.org

[Nov 19 05:49:20] ERROR[1286]: chan_echolink.c:2143 sendcmd: connect()
failed to connect to the Echolink server server5.echolink.org

[Nov 19 05:51:28] ERROR[1286]: chan_echolink.c:2341 do_el_directory: Unable
to connect to directory server server5.echolink.org

[Nov 19 05:51:28] ERROR[1286]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server3.echolink.org

[Nov 19 05:51:48] ERROR[1286]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server1.echolink.org

[Nov 19 06:16:57] ERROR[1546]: chan_echolink.c:2341 do_el_directory: Unable
to connect to directory server server5.echolink.org

    -- Received OK from Echolink server server3.echolink.org

[Nov 19 06:16:57] ERROR[1546]: chan_echolink.c:2410 do_el_directory: Error
in parsing header on server3.echolink.org
The port forwarding is set up in the router with 5198 and 5199 UDP
forwarded to the Pi and 5200 TCP allowed (although that shouldn't be
necessary as all outbound ports are allowed). The router logs (such as they
are) don't show anything remotely useful.

Where have I gone astray?

Thanks!
--
Elder Roland Smith K7OJL
Laie Hawaii Temple Visitors' Center
Blog: www.rnsmith.com
Cell: 208-406-8449
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org