[arm-allstar] Asterisk crashing when Echolink connected

[David McGough]

Hi Matt,

As others have mentioned, I've not seen this issue previously. I've got a
few questions to try and help debug this, feel free to send my a private
e-mail with answers, if you would prefer.

Is IPv6 networking in this mixture anywhere?

What are your Echolink and AllStar node numbers?

Does the crash occur when connecting to all Echolink nodes (like the 
Echolink *ECHOTEST* conference server, node #9999)?

If only specific node numbers cause the crash, what nodes are they?

Does AllStar connectivity work properly?


Thanks,

73, David KB4FXC


On Sun, 29 May 2016, Matt via arm-allstar wrote:

> Results so far...
> 
> RPi 3 still shows the same behavior although not as often. I've now 
> changed the power supply and am still seeing the same issue. The last 
> thing on my list is the interface but I don't have a spare so that's 
> going to be tough to test.
> 
> It seems to only crash asterisk when initially connecting to a remote 
> node and as soon as asterisk restarts, the connection works fine.
> 
> How very odd.
> 
> Matt
> M0LMK
> > Matt via arm-allstar <mailto:arm-allstar at hamvoip.org>
> > 29 May 2016 at 17:34
> > Thank Doug.
> >
> > Yes, I do use the checksum to ensure that I don't have a corrupt download.
> >
> > Problem still exists using the newest image on a new SD card.
> >
> > I have a new RPi3 on the desk so I'll plug that in and see if I can 
> > start to narrow it down to a HW fault...
> >
> > Matt
> > M0LMK
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> > Doug Crompton via arm-allstar <mailto:arm-allstar at hamvoip.org>
> > 29 May 2016 at 17:11
> > Matt,
> >
> >  Also in cases like this you should do a checksum test after you 
> > download the image. Checksums for all the releases in zipped and image 
> > form are on the website with the downloads.  Of course checksums only 
> > apply to a virgin image not one you have configured.
> >
> > *73 Doug
> > WA3DSP
> > http://www.crompton.com/hamradio*
> >
> >
> > > Date: Sun, 29 May 2016 14:29:55 +0100
> > > To: arm-allstar at hamvoip.org
> > > Subject: [arm-allstar] Asterisk crashing when Echolink connected
> > > From: arm-allstar at hamvoip.org
> > > CC: matt at m0lmk.co.uk
> > >
> > > I've set up a new node and all is working fine apart from the 
> > Echolink side.
> > >
> > > Whenever I try and connect the node to an echolink node, Asterisk
> > > randomly crashes and restarts. After a little investigation, I found
> > > this in the journal..
> > >
> > > May 29 14:25:25 allstar rc.local[194]: /usr/bin/safe_asterisk: line
> > > 125: 1765 Segmentation fault (core dumped) nice -n $PRIORITY
> > > ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} &> /dev/${TTY} < 
> > /dev/${TTY}
> > > May 29 14:25:25 allstar rc.local[194]: Asterisk ended with exit 
> > status 139
> > > May 29 14:25:25 allstar rc.local[194]: Asterisk exited on signal 11.
> > > May 29 14:25:25 allstar rc.local[194]: Automatically restarting 
> > Asterisk.
> > > May 29 14:25:25 allstar systemd-coredump[1855]: Process 1765 (asterisk)
> > > of user 0 dumped core.
> > >
> > > Has anyone seen this before and is there a fix?
> > >
> > > Thanks,
> > >
> > > Mat
> > > M0LMK
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> > Matt via arm-allstar <mailto:arm-allstar at hamvoip.org>
> > 29 May 2016 at 14:29
> > I've set up a new node and all is working fine apart from the Echolink 
> > side.
> >
> > Whenever I try and connect the node to an echolink node, Asterisk 
> > randomly crashes and restarts. After a little investigation, I found 
> > this in the journal..
> >
> > May 29 14:25:25 allstar rc.local[194]: /usr/bin/safe_asterisk: line 
> > 125:  1765 Segmentation fault      (core dumped) nice -n $PRIORITY 
> > ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} &> /dev/${TTY} < 
> > /dev/${TTY}
> > May 29 14:25:25 allstar rc.local[194]: Asterisk ended with exit status 
> > 139
> > May 29 14:25:25 allstar rc.local[194]: Asterisk exited on signal 11.
> > May 29 14:25:25 allstar rc.local[194]: Automatically restarting Asterisk.
> > May 29 14:25:25 allstar systemd-coredump[1855]: Process 1765 
> > (asterisk) of user 0 dumped core.
> >
> > Has anyone seen this before and is there a fix?
> >
> > Thanks,
> >
> > Mat
> > M0LMK
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> 
>