[arm-allstar] Autopatch CT & ARRL news

[Doug Crompton]

Robert,

 On the playnews script. It is not hard to implement. I can help if you want. Let me know what you were having problems with.

The problem with using a direct feed as you mentioned is that there is no timing included. The playnews script stops every 2.5 minutes for 20 seconds to allow system reset and so other nodes can send commands if necessary. You can customize the messages if desired.

You would have to manually add your own timing and breaks for ID's. On a connected network assume timeouts are at about 3 minutes.

For the autopatch, first of all that is something that is rarely used anymore except maybe in an emergency. Don't you have a cellphone and service where you live? Unless you live out in the sticks where cell coverage is sparse I would recommend not using it.  

If you must use it I would just explain as soon as the person answers that it is a one way conversation and to use over. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sun, 22 May 2016 12:52:33 -0500
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Autopatch CT & ARRL news
From: arm-allstar at hamvoip.org
CC: n4wgy.ham at gmail.com

I am genuinely appreciative of everyone's time. Thank you!
Explanation:Have observed that few people realize or remember that with most equipment an autopatch call is a half duplex conversation.Even if I state we are conversing at half duplex at the beginning of the autopatch conversation, doubles happen frequently.Am thinking that If I could tell folks I am calling via autopatch and that they should not to talk til after they hear the CT beep & say "over" after their piece is said, this would maybe reduce doubles.
Changing the noct=1 to noct=0 enables CT to be heard on the RF side during an autopatch qso, but does not propagate the CT to the telephone. Don't know what to do next.
In regards to the Scripts "how to" for setting up an automated ARL news feed on my node; I have been trying to implement with no success yet, but that's almost certainly my lack of experience. I am not proficient in implementing or manipulating code.Was wondering if there was a simpler way by possibly using the echolink news feeds from the ARRL. I will keep hammering at it, success is inevitable with persistance.
Thank you all very much for your advise!--Robert ConklinN4WGY

On Sat, May 21, 2016 at 11:32 PM, Mark Johnston via arm-allstar <arm-allstar at hamvoip.org> wrote:
I have not setup a ct for autopatch but I believe the line in rpt.conf similar to:








6=autopatchup,context=to-callcentric,noct=1,farenddisconnect=1,dialtime=20000
change noct=1 to noct=0 or remove that portion, and reload config..




"Got Root?"
How many software engineers does it take to change a light bulb?None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.WINDOWS: Will Install Needless Data On Whole SystemMICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².
"I get paid to support Windows, I use Linux to get work done."



On Sat, May 21, 2016 at 8:45 PM, Robert Conklin via arm-allstar <arm-allstar at hamvoip.org> wrote:
Hello, hope everyone is well.I regards to autopatch, how would I propagate a courtesy tone from the radio user unkeying to the phone user?Also wondering if it would be possible to set up a cron job to play the ARRL news from the W1AWBDCT echolink node, or is there a better way to do this?Thank you for any advise!--Robert ConklinN4WGY


_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org



_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org



_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160522/691f68af/attachment.html>