[arm-allstar] Local audio question

[Doug Crompton]

Robert,

 Not sure what you mean by link traffic but there is a channel B output on the FOB that has the same audio as channel A, the one normally used. They are independently settable in level. Of course it would not directly dive a speaker, you would have to use a small amplifier. 

Set the second channel in simpleusb.conf

txmixa=voice   ; Left channel output: no,voice,tone,composite,auxvoice
                        ; no - Do not output anything
                        ; voice - output voice only

txmixb=no       ; Right channel output: no,voice,tone,composite, auxvoice
                        ; See txmixa above.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 19 May 2016 20:14:46 -0500
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Local audio question
From: arm-allstar at hamvoip.org
CC: n4wgy.ham at gmail.com

Greetings to everyone.
Is there a way to pull audio from incoming link traffic in a repeater node from the Rpi to a speaker? I'd like have this capability for a repeater cabinet
--Robert ConklinN4WGY


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160519/abbe1e39/attachment-0006.html>