[arm-allstar] Alpha test: CORRECTION: rpt_notch

[David McGough]

BTW, after looking at this code tonight, I realized the rpt.conf parameter 
is: rxnotch NOT: notch


So, here are the corrected rpt.conf stanza statements:


rxnotch=f0,b0[...,fn,bn]  ; where n < 10

To notch a 880hz tone with a 60hz bandwidth, there statement would be:

rxnotch=880,60



On Thu, 12 May 2016, David McGough via arm-allstar wrote:

> 
> Duane,
> 
> I've uploaded a updated alpha test copy of the AllStar code released with 
> 1.02beta. This update includes all the beta code in the 1.02beta version, 
> plus I compiled in the rpt_notch and mdc1200 encode/decode functionality.
> 
> I -think- this code will run on 1.01 for the RPi2 as well, I HAVE NOT 
> TESTED IT AT ALL!
> 
> Anyhow, downloading and installing won't clobber what you've already got 
> setup. Here are the instuctions:
> 
> login as root
> 
> cd
> 
> wget https://hamvoip.org/alpha-test/hamvoip-allstar-alpha-2016-05-12.tgz
> 
> # This mv command may fail. If it fails, no problem, continue. 
> mv /usr/local/hamvoip-alpha-test/ /usr/local/hamvoip-alpha-test-save  
> 
> cd /
> 
> tar xvzf /root/hamvoip-allstar-alpha-2016-05-12.tgz
> 
> #-------------------------------------------------------
> 
> #Then, to run this test version of asterisk:
> 
> /usr/sbin/asterisk -vvvvrgc
> stop now
> 
> /usr/local/hamvoip-alpha-test/sbin/asterisk
> 
> #To connect:
> 
> /usr/local/hamvoip-alpha-test/sbin/asterisk -vvvvrcg
> 
> Note that the original version of Asterisk/AllStar is still installed and 
> untouched and will automatically start after a reboot, unless you change 
> the boot script in /usr/local/etc/rc.allstar
> 
> I'm interested to get feedback about how this works (or doesn't work!).
> 
> 
> Have fun--and, please report back!
> 
> 
> 73, David KB4FXC
> 
> 
>