[arm-allstar] Setting up Zoiper for Allstar - How to make the mute button work as PTT

Doug Crompton doug at crompton.com
Sun May 1 23:09:33 EST 2016


OK I did a little more reading on this. The Pv in the dialplan -

exten => 40000,n,rpt(40000|Pv)

means VOX. So muting takes away all audio and clears PTT.  I have no idea if this actually works because I have not tried it but apparently it does. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sun, 1 May 2016 22:22:45 -0400
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Setting up Zoiper for Allstar - How to make the	mute button work as PTT
From: arm-allstar at hamvoip.org
CC: wa3adi at comcast.net

Hi Steve,
Zoiper works on my iPhone without much effort. The instructions were good. Are you using an iPhone also?
Since Zoiper is full duplex, the mute button only mutes your ability to be heard. It's not like a regular PTT button. You can hear what the other person is saying throughout the contact.
I hope this helps.

73 de Vince-WA3ADI, Havertown, PA - Allstar Node #41820
On May 1, 2016, at 10:04 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:




Steve,

 I have used zoiper but I am not an expert and I have not used mute.

I would suggest contacting W1BFC, Bernie or K1GMM. They probably have QRZ emails. If you find an answer publish it back here for all to see.

http://vermontallstar.boards.net/thread/61/zoiper-access-setup
73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Sat, 30 Apr 2016 20:24:40 -0500
Subject: [arm-allstar] Setting up Zoiper for Allstar - How to make the mute	button work as PTT
From: arm-allstar at hamvoip.org
CC: ssedgwick at suddenlink.net





Hi,
 
I followed the “Setting Up Zoiper for Allstar” instructions in the “User 
Tech Notes and Interresting Sites” section on Doug’s website here: http://crompton.com/hamradio/BeagleBoneBlackAllstar/ConnectZoipertoAllstarNode.pdf
 
I got it working, but the mute button does not operate as a PTT button as 
described in the tech notes.  I posted on another website and was helped by 
another ham telling me to use *99 to switch to transmit and # to switch back to 
receive.  That worked, but I would really like to use the mute button to 
toggle between transmit and receive as described in the tech notes above.  
Has anyone else tried this and got it to work?  Did you need to make any 
changes?
 
Thanks,
Steve_WB8GRS

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160502/5674f325/attachment.html>


More information about the arm-allstar mailing list