[arm-allstar] Error when using RPI2 to connect to BBB

[Roselito de los Reyes]

Hi Larry,

It would be good to stick with the Hamvoip version for the rPi 2. The code is very stable.

Best regards,

Roselito De Los Reyes


> On Mar 31, 2016, at 8:21 PM, Larry via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Thanks for the reply Doug,
> I am sure you are probably correct about a reload fixing things.
> 
> The BBB node with the issue is a version 1.2.1 as is my other BBB node which accepts calls from the Pi2 nodes.
> The one RPI2 node is Version 1 and the other Pi2 has Dial installed which I was trying out to see how it worked.
> 
> Had plans to do upgrades to all my nodes once the PI version 2 and BBB upgrades get released from the final testing phase.
> Currently my question about the failure is not a crisis as both my Pi2 nodes were being held waiting for Version 2 before deployment and are just test nodes at present.
> 
> Upgrades to both my BBB's are planned during that same time. 
> I'm not sure if the BBB V.1.2.2 you referred to is the newest BBB code and I missed it's release or just Version 1.2.1 with the echo fix.
> Haven't been keeping as close watch since the RPi3 testing has created a lot of the bandwidth.
> 
> As a final comment...  my BBB nodes have performed flawlessly since installation. Never a hickup... they just run...
> Appreciate all you guys do. 
> 
> Great Work!
> 
> Larry - N7FM
> 
> 
>> On 03/31/2016 01:55 PM, Doug Crompton via arm-allstar wrote:
>> Larry,
>> 
>>  Assuming you have not done any big time configuration of the BBB why don't you update it. Are you really using version 1? Not 1.2.1?  If so I would update. Version 1 is very old and there were many changes in 1.2.1.
>> 
>> The current download is 1.2.2 at hamvoip.org.
>> 
>> It is an error in configuration somewhere but probably easier to just update. 
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio
>> 
>> 
>> > To: arm-allstar at hamvoip.org
>> > Date: Thu, 31 Mar 2016 11:57:58 -0700
>> > Subject: [arm-allstar] Error when using RPI2 to connect to BBB
>> > From: arm-allstar at hamvoip.org
>> > CC: larry at thunderbolt.net
>> > 
>> > The forest is thick enough that I can't see the trees and I'm lost.
>> > 
>> > Just discovered that one of my BBB nodes will not accept incoming 
>> > connects from my Pi nodes (one Dial and one PI2 Ver 1)
>> > This is the error I get .... when trying to connect outbound from either 
>> > Pi node to this BBB node. The Pi nodes accept inbound from this BBB node 
>> > fine.
>> > All my other Acid nodes connect inbound to this BBB just fine, the Pi 
>> > Nodes fail.
>> > 
>> > -- Executing [29017 at radio-secure:1] Rpt("IAX2/192.168.9.53:4562-5255", 
>> > "29017") in new stack
>> > [Mar 31 10:40:39] WARNING[3630]: app_rpt.c:22706 rpt_exec: Reported node 
>> > 41880 not in correct format!!
>> > == Spawn extension (radio-secure, 29017, 1) exited non-zero on 
>> > 'IAX2/192.168.9.53:4562-5255'
>> > -- Hungup 'IAX2/192.168.9.53:4562-5255'
>> > 
>> > Assuming from the error that the 2 Pi nodes format are not liked by this 
>> > particular BBB. I checked and double checked setting, codecs allowed and 
>> > all appear to be set properly
>> > between them. During the attempted codec negotiation I have ulaw 
>> > negotiated fine prior to the error. I have tried other           codecs to see if 
>> > it made a difference with no positive results.
>> > 
>> > I do have another BBB that works fine with incoming call from these same 
>> > 2 Pi nodes so someplace there is something set wrong on this one BBB node.
>> > 
>> > Having checked and compared all that I can think of ... any clues as to 
>> > what am I overlooking?
>> > 
>> > Larry - N7FM
>> > _______________________________________________
>> > 
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> > 
>> > Visit the BBB and RPi2 web page - http://hamvoip.org
>> > 
>> 
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160331/14c3010f/attachment.html>