[arm-allstar] help with echolink setup

[Mike - W5JR]

I'm using pseudo. The Echolink link refuses to register with the Echolink servers. Using the same servers that I use on my public node on acid server. And yes, I have two different ISP's here at my location, one on each, with different Echolink callsigns. 

tnx
Mike / W5JR
Alpharetta GA

> On Mar 24, 2016, at 2:56 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> It just occurred to me, you aren't using an echolink rxchannel connect in the pseudo node are you?  It must just be a pseudo connection -
> 
> rxchannel=dahdi/pseudo
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Date: Thu, 24 Mar 2016 02:22:09 -0400
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] help with echolink setup
> From: arm-allstar at hamvoip.org
> CC: w5jr.lists at gmail.com
> 
> Interested to hear if you make Echolink work from a pseudo (private) node. I've been working on one off and on for a few months without any luck. Always seems to work with a public node number. 
> 
> Mike / W5JR
> Alpharetta GA
> 
> On Mar 24, 2016, at 1:32 AM, Larry Teran via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> I'am running hamvoip.org code Doug, and echolink is pointing to a pseudo node, server1,2 and 3 a set to load on the echolink.conf file.
> 
> 73"s Larry KI6YAA
> 
> On Wed, Mar 23, 2016 at 10:22 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> First of all you are running the hamvoip.org code right?  By default GPS is not enabled and echolink is. Here is a snippet from /etc/asterisk/modules.conf -
> 
> noload=app_followme.so
> ;noload=chan_echolink.so
> noload=app_transfer.so
> ;noload=func_callerid.so
> noload=app_directed_pickup.so
> ;noload=chan_voter.so
> noload=app_flash.so
> noload=app_page.so
> noload=app_gps.so
> noload=pbx_dundi.so
> noload=app_setcallerid.so
> noload=app_dictate.so
> 
> The lines commented out with a semicolon ARE loaded. The others are not.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Date: Wed, 23 Mar 2016 21:21:52 -0700
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] help with echolink setup
> From: arm-allstar at hamvoip.org
> CC: ki6yaa at gmail.com
> 
> I'm Getting this error while loading the module.
> 
> [Mar 13 10:37:16] ERROR[1783]: chan_echolink.c:3310 store_config: Unable to resolve echolink APRS server IP address
> 
> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160324/c6665413/attachment-0001.html>