[arm-allstar] help with echolink setup

[Doug Crompton]

Echolink works fine on a pseudo node. I have been using it here for several years. Just attach to the Allstar pseudo node number in echolink.conf and then connect your radio node to that pseudo node.  The reason for doing it this way is to make it easier to disconnect Echolink if necessary as you only have to disconnect the pseudo node. 
What is the symptom of it not working?

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 24 Mar 2016 02:22:09 -0400
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] help with echolink setup
From: arm-allstar at hamvoip.org
CC: w5jr.lists at gmail.com

Interested to hear if you make Echolink work from a pseudo (private) node. I've been working on one off and on for a few months without any luck. Always seems to work with a public node number. 

Mike / W5JRAlpharetta GA
On Mar 24, 2016, at 1:32 AM, Larry Teran via arm-allstar <arm-allstar at hamvoip.org> wrote:

I'am running hamvoip.org code Doug, and echolink is pointing to a pseudo node, server1,2 and 3 a set to load on the echolink.conf file.
73"s Larry KI6YAA
On Wed, Mar 23, 2016 at 10:22 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:



First of all you are running the hamvoip.org code right?  By default GPS is not enabled and echolink is. Here is a snippet from /etc/asterisk/modules.conf -

noload=app_followme.so
;noload=chan_echolink.so
noload=app_transfer.so
;noload=func_callerid.so
noload=app_directed_pickup.so
;noload=chan_voter.so
noload=app_flash.so
noload=app_page.so
noload=app_gps.so
noload=pbx_dundi.so
noload=app_setcallerid.so
noload=app_dictate.so

The lines commented out with a semicolon ARE loaded. The others are not.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 23 Mar 2016 21:21:52 -0700
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] help with echolink setup
From: arm-allstar at hamvoip.org
CC: ki6yaa at gmail.com

I'm Getting this error while loading the module.
[Mar 13 10:37:16] ERROR[1783]: chan_echolink.c:3310 store_config: Unable to resolve echolink APRS server IP address


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  

_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160324/0ad5fdd9/attachment-0001.html>