[arm-allstar] Private node timeout

[Sam Nabkey]

Most likely the issue was, he was in remote command mode. (*4) to control
the hub..

that will cause your node to hang until you hit the # key.  which
eventually will cause a timeout.

also, with all the code changing going on, I have an idea I'd like to see
accomplished with the whole hub scenario.   I would do it myself but I hate
disparate code in projects of this size and the two obvious flavors that
are forming now are enough.

Davd, do you have any interest in ideas or is your development team a
closed loop?

Sam
On Mar 9, 2016 5:45 PM, "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Yes...
>
> On Wed, 9 Mar 2016, Roger Bly via arm-allstar wrote:
>
> > It’s totime in rpt.conf, right?
> >
> >
> > > On Mar 9, 2016, at 1:13 PM, Doug Crompton via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> > >
> > > It is just a TX timeout which is set by totimeout in rpt.conf. Default
> is 300000 mS  which is 5 minutes.
> >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160310/d8c78b2f/attachment.html>