[arm-allstar] Question about timing/responsiveness

[Roselito de los Reyes]

Hi David, 

I would like to try out the simple USB patch on a DiAl distro as I am encountering eh same problem.

Best regards,

Roselito De Los Reyes
KK6OOS


> On Mar 5, 2016, at 1:28 PM, David McGough via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> 
> Hi Chuck,
> 
> I think you may be encountering the variable audio delay issue in the 
> V1.0 simpleusb code??  ...If you've running the simpleusb driver, you may 
> want to try the beta-test patch we've got.
> 
> 73, David KB4FXC
> 
> 
> 
>> On Sat, 5 Mar 2016, Chuck Kelsey via arm-allstar wrote:
>> 
>> The repeater is up on a mountain. No Internet there.
>> 
>> The node is at the owner's house and is connected to a transceiver. It 
>> communicates with the repeater as if it were any other user. Via AllStar 
>> it connects to several other repeaters.
>> 
>> It has worked fine that way for a couple years using a desktop computer 
>> at his house. The problem began when he switched to the Rapsberry Pi.
>> 
>> Chuck
>> WB2EDV
>> 
>> 
>>> On 3/5/2016 2:02 PM, Doug Crompton via arm-allstar wrote:
>>> I think the key here is that you say the repeater is on a "hardware 
>>> base controller" By that you mean that Allstar is not controlling the 
>>> repeater? How is Allsar connected? Through a port on a hardware 
>>> controller?
>>> 
>>> Is The Allstar computer actually at the site or elsewhere? I am 
>>> assuming elsewhere since you say there is no internet there and you 
>>> talked about network dropouts.
>>> 
>>> It would help if you gave a list of components and how they are 
>>> connected and where in relationship to each other they are located.
>>> 
>>> *73 Doug
>>> WA3DSP
>>> http://www.crompton.com/hamradio*
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org