[arm-allstar] Question about timing/responsiveness

[Roselito de los Reyes]

Chuck,
This is funny as I am seeing the same issue with an ACID node.
Lito

> To: arm-allstar at hamvoip.org
> Date: Sat, 5 Mar 2016 12:40:13 -0500
> Subject: [arm-allstar] Question about timing/responsiveness
> From: arm-allstar at hamvoip.org
> CC: wb2edv at roadrunner.com
> 
> I'm new to this list, but didn't see this question addressed in the 
> archives.
> 
> When using a Raspberry Pi2, as a link connection to a repeater, here's 
> what happens:
> 
> The repeater transmits PL only during an active transmission (no tone 
> after user unkeys). However, there seems to be a slow response time for 
> the Raspberry to cease sending the transmission over AllStar when the 
> user drops key. It is causing the node at "the other end" to continue 
> transmitting as if there was a hang time.
> 
> Also, when a user comes through from the AllStar network, there are 
> audio dropouts some of the time.
> 
> This setup is not mine, I'm asking for a friend that owns it.
> 
> Chuck
> WB2EDV
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160305/ac369c4e/attachment.html>