[arm-allstar] Echolink Sometimes Not Loading

[John]

Looks like you and Jim had the key all along... thanks.

John

On Sun, Jun 12, 2016 at 9:48 AM, Neil k8it via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> I had the same issue and found a easy solution that works every time
> Just change the default time from 0 to 30 in Allstar.rc
>
>
>
>
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> WIRES-X K8IT 11479 Room 21479
>
> *From:* Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>
> *Sent:* Sunday, June 12, 2016 10:28 AM
> *To:* ARM Allstar <arm-allstar at hamvoip.org>
> *Cc:* Doug Crompton <doug at crompton.com>
> *Subject:* Re: [arm-allstar] Echolink Sometimes Not Loading
>
> I have not seen that issue here but then my systems are generally 24/7
> with some having 300+ day up times.
>
> Database problems will cause echolink to error and not load. Perhaps there
> needs to be some more error detection there.
>
> It also might be a port problem through the VPN? Echolink does require
> forwarded ports.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> > Date: Sun, 12 Jun 2016 10:14:40 -0400
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] Echolink Sometimes Not Loading
> > From: arm-allstar at hamvoip.org
> > CC: kb4fxc at inttek.net
> >
> >
> > Hi John,
> >
> > I've noticed this issue with chan_echolink for a long time, even with old
> > ACID boxes. I haven't really looked for the cause. On the echolink
> enabled
> > boxes, after reboot, I just have a script to stop/start asterisk once it
> > has been running for 1 minute.....I suspected the problem was perhaps
> > caused by the lack of an echolink node database having been downloaded???
> > Maybe???
> >
> >
> > ...Yeah, I know stopping/starting isn't an ideal solution! I'll put this
> > on the list to look at.
> >
> >
> > 73, David KB4FXC
> >
> >
> >
> >
> > On Sun, 12 Jun 2016, John via arm-allstar wrote:
> >
> > > Looking for some guidance on why Echolink might not load after node
> reboot
> > > (or initial startup). This behavior does not happen all the time, only
> > > sporadically. A "module load chan_echolink.so" starts echolink without
> > > errors if it has not loaded at boot/reboot. I'm using a VPN on the node
> > > with RPi2/RPi2-3_V1.02beta_Allstar.img.zip
> > >
> > > Thanks for any suggestions.
> > >
> > > John
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
>
> ------------------------------
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7639 / Virus Database: 4598/12406 - Release Date: 06/12/16
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160612/a6816b63/attachment-0001.html>