[arm-allstar] Hub Node rpt.conf Configuration Questions

[Andrew Sylthe]

Doug,

Thank you for confirming my suspicions that duplex= doesn't matter in
rpt.conf for a Hub Node.

I appreciate it.

Thanks!

On Tue, Jul 12, 2016 at 11:38 AM, Doug Crompton via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> Andrew,
>
>  I run a radio-less hub and the duplex, Id's, courtesy tone, connect
> messages, etc.  have no influence on its operation except if you connect
> directly via iaxrpt or equivalent. They would never be introduced into the
> stream of the connected nodes.  So unless you care about what you hear when
> you connect with iaxrpt it does not matter.
>
> I do often use iaxrpt to my hub and I do have both idrecording and
> idtalkover commented out because I do not want or need to hear the ID when
> connected in that way. Since there is no radio connected there is no reason
> to ID.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Tue, 12 Jul 2016 10:03:50 -0500
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Hub Node rpt.conf Configuration Questions
> From: arm-allstar at hamvoip.org
> CC: asylthe at kc9ona.com
>
>
> Hello Everyone,
>
> I have a working Hub Node configured as a second node on a RPi3 with the
> following pertinent configuration options in rpt.conf:
>
> *rxchannel=dahdi/pseudo*
> *duplex=0*
>
> *;idrecording=*
> *;idtalkover=*
>
> Does anyone happen to know if it even matters what you set *duplex=* as,
> or if you'd even need to uncomment and set the *idrecording* and
> *idtalkover* configuration options? I can't think of any reasons why you
> would need to, but am asking these questions in case I'm missing something.
> The Hub Node doesn't have a directly connected radio.  My thoughts are,
> then why would you need the Hub Node to identify or provide telemetry. I
> tried searching Google & the mailing list archives for earlier discussions
> on the topic, but couldn't find anything.
>
>
> All comments are welcome, Thanks!
>
> --
> Andrew Sylthe
> KC9ONA
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160712/02dc84b4/attachment.html>