[arm-allstar] irlp on rasberry pi 3

[Steve Passmore]

The audio problem described was only when using the ADPCM codec.  Switching
to ulaw (uncomp in IRLP) eliminates the problem.
On Jul 11, 2016 10:28 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> jon,
>
>  We won't know until we actually get it into testing. I suspect if
> something was broken we could get it fixed unless it was technically
> impossible. But Allstar and many of the changes going on there remains our
> highest priority.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
> ------------------------------
> To: arm-allstar at hamvoip.org
> Date: Mon, 11 Jul 2016 13:05:07 -0400
> Subject: Re: [arm-allstar] irlp on rasberry pi 3
> From: arm-allstar at hamvoip.org
> CC: jrorke at cogeco.ca
>
> I have a question on this. I know the older legacy  PC SW that had the
> embedded bridge had a problem where IRLP audio levels would jump and down
> every so often.
>
> Will the Pi code have this fixed?
>
> looking forward to trying this out.
>
> Jon VA3RQ
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160711/535a810a/attachment.html>