[arm-allstar] wifi on PI2

[Doug Crompton]

Greg,

 I would recommend using the Pi3 in a wireless application but attached is the wireless info for the RPi2. Note in this howto we only supported specific adapters.
This is ONLY for the RPi2 - the RPi3 howto is on the web site. I probably should put this one back on the site but I didn't want to encourage wifi use on the Pi2 as the SW is no longer  supported. 

You also have the option of using an external adapter as described in this howto. That works well. The Pi thinks it is always in wired mode.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> To: arm-allstar at hamvoip.org
> Date: Mon, 11 Jul 2016 21:17:22 -0400
> Subject: [arm-allstar] wifi on PI2
> From: arm-allstar at hamvoip.org
> CC: kb1ncj at gmail.com
> 
> I could not find any wifi tools for the PI2 since the release of PI3 on 
> hamvoip. I wish to have the pi boot up and auto reconnect on network it 
> was on last, headless if possible.
> Thanks
> Greg
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160711/caeaadf6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wireless_howto.pdf
Type: application/pdf
Size: 211933 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160711/caeaadf6/attachment-0001.pdf>