[arm-allstar] TX Inhibit

[Roselito de los Reyes]

can you provide a scenario where the linktolink parameter is useful? and maybe an example would be great.

> Date: Sat, 13 Feb 2016 13:28:05 -0500
> From: kb4fxc at inttek.net
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] TX Inhibit
> 
> 
> Fantastic! 
> 
> On Fri, 12 Feb 2016, Levi Maaia wrote:
> 
> > David,
> > 
> > Your configuration worked for me! Now my remote base is able to key up
> > after the courtesy tone but doesn't have to wait for the repeater it is
> > talking to, which has a long squelch tail, to drop carrier. Perfect!
> > 
> > LCM
> > On Feb 12, 2016 10:35 AM, "Roselito de los Reyes" <tolitski at hotmail.com>
> > wrote:
> > 
> > > Hi David,
> > >
> > > How does this "linktolink" configured in a "50 thousand" foot view?
> > >
> > > Lito
> > >
> > > > Date: Fri, 5 Feb 2016 02:35:26 -0500
> > > > From: kb4fxc at inttek.net
> > > > To: arm-allstar at hamvoip.org
> > > > Subject: Re: [arm-allstar] TX Inhibit
> > > >
> > > >
> > > > Hi Levi,
> > > >
> > > > I'm not sure exactly how you have your remote-base configured. However,
> > > > here are the important parts of a solution that works for me. This
> > > config
> > > > is for dedicated backbone link radios.
> > > >
> > > > In rpt.conf:
> > > >
> > > > [1111] ; Example node 1111, a simplex radio
> > > > duplex=0
> > > > linktolink=y
> > > > hangtime=0
> > > > althangtime=0
> > > >
> > > >
> > > > [nodes]
> > > > 1111 = radio at 127.0.0.1/1111,NONE,y ; Sample simplex radio node
> > > >
> > > >
> > > >
> > > > 73, David KB4FXC
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160213/77e33f4d/attachment.html>