[arm-allstar] RTCM txctcss values between Acid and Rpi2-V1

[R Dahl]

I bench tuned a repeater and RTCM (pl 103.5 at 300Hz) using Acid and then
installed it on a mountain top where all went well.  I have since started
using Rpi2 V1 as the remote server while retaining the txctcss values from
Acid's voter.conf
I am now having sporadic intermod issues to the rptr rx which are only
present when the RTCM is tx'ing pl audio. The fix has been to reduce the
txctcss value from 40 to 10 which is still working ok to  open pl squelches.
I would not have to ask this but my service monitor is too deaf to measure
the rptr ctcss level from 30 miles.  Should the same setting in voter.conf
result in the same pl level in both Acid and Rpi V1 when talking to a RTCM?
tnx de Ross ve6ars
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160213/9c69de5a/attachment.html>