[arm-allstar] zoiper issue

[Larry]

Jeff,

A comment if I might ... Since you mentioned running an Android device 
the iax/rpt app works much smoother and has better audio control than 
Zoiper.
I personally would recommend you switch. If you happen to compare both 
you will see why.

The registration error, if it occurs, in my case it has to do with the 
IP address or password your phone is trying to register with.
LAN versus Verizon in my case. I at times forget I have 2 diifferent IP 
account settings ...one for local WIFI and the other for Verizon.
When home my auto use of the wifi will throw that error when I have 
select the account setting intended for Verizon (results in an IP and 
password mismatch)

Here is what my setup is like. It works for me.

In ---> iax.conf
-----------------------------------------------------------
[Your user account name]       ;joe?
username=your user account  ;joe?
Type=friend
context=myphone                  ; Make a [myphone] context in 
(extensions.conf) to answer the incoming call -- see below.
host=dynamic                        ; In the PHONE account settings this 
will need to be the public IP of your Router
                                               ; Or if connecting from 
your PHONE to your LAN wifi make a separate account with the host IP 
settings being the Allstar PC's IP
auth=md5
secret=XXXXX                         ; change this to your account password
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
callerid="XXXXX"                      ;Change this!
---------------------------------------------------------------

In ---> extensions.conf              ; Make sure you have a "context" to 
match the context listed in your iax.conf
[myphone]
;exten=1998,1,rpt(1998|P)
;exten=1999,1,rpt(1999|P)
exten=XXXXX,1,rpt(XXXXX|P)    ; XXXXX= change to your node number

In your router you should port forwarded UDP 4569 or whatever port 
number you have assigned in iax.conf to the Allstar computers IP.

Use this same information along with the port 4569 or whatever, if you 
have changed it from the default, to configure your phone account.

Larry - N7FM


On 12/13/2016 10:14 AM, "Jeff Omundson via arm-allstar" wrote:
> Hello,
> So I ran asterisk -rvvv and tried to connect
>
>   [Dec 13 10:11:53] NOTICE[295]: chan_iax2.c:6855 register_verify: No
> registration for peer '44216' (from 192.168.0.100)
>
> I get this message repeating it self.  Tried to find information via google
> about 'No registration for peer...' but didn't get anywhere.  I don't know
> if this is my issue or if it is something different.  I am able to use my
> node without a problem through the radio link.
>
> Thanks for any help anyone can offer!
>
> -Jeff
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>