[arm-allstar] Hang Time (?) Problem - K5FOY

[Doug Crompton]

There is no VOX mode for the radio in Allstar unless the user is using a
VOX operated interface.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Dec 8, 2016 at 12:53 PM, "George Csahanin via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Could he be in vox mode(I think that's still available...)
>
> GeorgeC
> W2DB
> 2360
>
> On 12/08/2016 12:32 PM, "John via arm-allstar" wrote:
>
>> I'm attempting to assist a friend with a problem that started on his Pi
>> node about a month ago. It acts as if the hang-time was increased to about
>> 10 seconds. Because it is a simplex node, he has to wait for transmit to
>> drop on every transmission. He had not made any software changes to his
>> node when the problem occurred. He tried booting with his  backup SSD
>> (from
>> a time when everything was working properly) and still had the same
>> problem. He has added toroids on wires and cables - no change. The delay
>> is
>> evident both on Allstar connections and Echolink. He is using a DMK URI
>> attached to a 2 meter mobile.
>>
>> Any thoughts on how to continue to troubleshoot this problem would be
>> greatly appreciated.
>>
>> Thanks!
>>
>> John
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>