[arm-allstar] Arduino Nano info

[Barry Buelow]

Here is a link to some info on a board which accommodates the Nano and provides IO for 2 radios. It also has a number of status LEDs.  Please don't get over excited about this as Dave is still working on software and I'm looking into kitting options.
Options:
1.  The bare board will be offered, user to source all parts.  Other than the headers, the parts are SMD size 0805 and SOT-23. These can be done by hand if you take your time and have good soldering skills.
2.  The board with all SMD parts installed. Female headers provided. User solders headers. The board is UNTESTED. The board is built with solder paste stenciled, components installed and oven baked using the Colonels secret recipe. Visually inspected. 

3.  Fully assembled board. Tested.  Possibly including:  USB-A to USB-Micro cable and Nano,  if there is interest. 

In all cases, user provides a 5v 16MHz Nano and you'll need a USB cable to go from the RPi (USB-A male) to the Nano (USB Micro male).  There are both USA and China suppliers. Shipping time from China can be 2-4 weeks. I suggest buying from a Hong Kong vendor as mail seems to arrive sooner.  USA prices are slightly higher. 

https://sites.google.com/site/radiofarmprojects/home/hamvoip-nano-interface
This page will be updated with more info and photos as details are worked out.
Barry w0iy