[arm-allstar] Same server nodes can't connect

Doug Crompton doug at crompton.com
Wed Aug 31 14:51:16 EST 2016


iax.conf should only have registration entries for the nodes that are on that server. Same with extensions. 

Question - are you able to ping from each server to the other and get good responses? Can you ssh from each server to the other?

If you send me a personal email with your node numbers and login passwords for these servers and the port if you have changed it from 222 I would be glad to log in and take a look and see what I find. Also send me your phone number if possible.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Wed, 31 Aug 2016 13:44:16 -0500
Subject: Re: [arm-allstar] Same server nodes can't connect
From: arm-allstar at hamvoip.org
CC: wadeo at charter.net


  
    
  
  
    Ok so I have the port defined and matched in iax.conf and on
      allstarlink.org correctly, here is what the CLI puts out as I try
      from each node. 

    

    

    

    kc0mlt*CLI> rpt fun 28757 *340509

            -- Hungup 'DAHDI/pseudo-1590956738'

        [Aug 31 13:30:18] NOTICE[3053]: chan_iax2.c:4087
          __auto_congest: Auto-congesting call due to slow response

            -- Hungup 'IAX2/127.0.0.1:4569-3215'

            -- Hungup 'DAHDI/pseudo-1461208458'

            -- <DAHDI/pseudo-605829635> Playing
          'rpt/node' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'digits/4' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'digits/0' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'digits/5' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'digits/0' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'digits/9' (language 'en')

            -- <DAHDI/pseudo-605829635> Playing
          'rpt/connection_failed' (language 'en')

            -- Hungup 'DAHDI/pseudo-605829635'

        kc0mlt*CLI> rpt fun 40509 *328757

            -- Hungup 'DAHDI/pseudo-2048896914'

        [Aug 31 13:30:47] NOTICE[3057]: chan_iax2.c:4087
          __auto_congest: Auto-congesting call due to slow response

            -- Hungup 'IAX2/127.0.0.1:4569-10731'

            -- Hungup 'DAHDI/pseudo-809931732'

            -- <DAHDI/pseudo-1497001609> Playing
          'rpt/node' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'digits/2' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'digits/8' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'digits/7' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'digits/5' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'digits/7' (language 'en')

            -- <DAHDI/pseudo-1497001609> Playing
          'rpt/connection_failed' (language 'en')

            -- Hungup 'DAHDI/pseudo-1497001609'

        kc0mlt*CLI> 

    

    In iax.conf on the Pi there is only one entry for the 40509 node
      at the beginning. Do I need to copy and paste in a segment for the
      28757 node (and of course modify the node and PW parts)?

    

    

    Wade

    

    

    

    On 08/31/2016 08:06 AM, Doug Crompton
      via arm-allstar wrote:

    
    
      
      Wade,

          

          -  4569 is the default port so you don't have to enter that
          port unless you want to for consistency.

          

          -  make sure your port definition in iax.conf and that servers
          port at allstarlink.org match for each server. IP address in
          iax.conf should be 0.0.0.0 (default) and no IP address at
          allstarlink.org - should be default DHCP

          

          - nodes entry at each server for itself - 127.0.0.1 and the
          other servers IP and its port

          

          What kind of message(s) are you getting in the client at each
          end when you attempt the failed connect? Do you have codecs
          that match on each server?

          

          asterisk -rvvv     and look for messages at connect attempt.

          
        73 Doug

          WA3DSP

          http://www.crompton.com/hamradio

        

        

        
          To: arm-allstar at hamvoip.org

          Date: Wed, 31 Aug 2016 02:32:36 -0500

          Subject: Re: [arm-allstar] Same server nodes can't connect

          From: arm-allstar at hamvoip.org

          CC: wadeo at charter.net

          

          Yep, I have followed that sheet. Here is what the Pi has in
          the rpt.conf file towards the bottom.. (xxxx = port assigned)

          40509 = radio at 127.0.0.1/40509,NONE

          28757 = radio at 127.0.0.1/28757,NONE

          40508 = radio at 192.168.1.105:XXXX/40508,NONE

          Of course the Acid server is just the opposite with the
          appropriate port entered. I can't figure it out.. Did
          something corrupt possibly?? Am I needing to do a fresh
          install from the card? Is there any other file I should be
          looking at for this?

          

          

          Wade

          

          

          

          On 08/30/2016 10:12 PM, Doug
            Crompton via arm-allstar wrote:

          
          
            
            There has been a howto about
                this on the hamvoip.org web site for a long time.....
              

              https://www.hamvoip.org/multi-server%20howto.pdf

              

              73 Doug

                WA3DSP

                http://www.crompton.com/hamradio

              

              

              > To: arm-allstar at hamvoip.org

                > Date: Tue, 30 Aug 2016 20:22:46 -0500

                > Subject: [arm-allstar] Same server nodes can't
                connect

                > From: arm-allstar at hamvoip.org

                > CC: wadeo at charter.net

                > 

                > Good evening all,

                > 

                > 

                > Today I moved one of my nodes from an old ACID
                server in the other room 

                > to the Pi I have in my shack. The Pi now has 2
                nodes on it and the ACID 

                > machine only has 1. After following the
                documentation online for setting 

                > up a second node on the Pi I am having an issue.
                The 2 nodes on the Pi 

                > can not connect to each other. They can both
                connect to the ACID server 

                > / node and to any other node anywhere in the world,
                just not to each 

                > other. Apparently there is something I missed and
                for the life of me 

                > can't think of anything else to try here.

                > 

                > Yes, I did make the appropriate changes on the
                AllStar website and I do 

                > have the severs on different ports with correct
                forwarding and all that. 

                > Another node here in town can connect to any node
                of mine as one would 

                > expect. This seems to be something small so I have
                probably overlooked 

                > it somewhere.

                > 

                > 

                > Thanks in advance!

                > 

                > Wade

                > 

                > KC0MLT

                > 

                > 

                > (28757, 40509 RPi nodes)

                > 

                > (40508 ACID node)

                > 

                > _______________________________________________

                > 

                > arm-allstar mailing list

                > arm-allstar at hamvoip.org

                > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

                > 

                > Visit the BBB and RPi2 web page - http://hamvoip.org

                > 

              
            
            

            
            

            _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
          
          

          

          _______________________________________________
          arm-allstar mailing list
          arm-allstar at hamvoip.org
          http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
          Visit the BBB and RPi2 web page - http://hamvoip.org
      
      

      
      

      _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
    
    

  


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160831/235e0de6/attachment.html>


More information about the arm-allstar mailing list