[arm-allstar] Fan Control Using URI (or RIM) I/O

[John]

Thanks for the info, Roselito. One of the things I have not been able to
resolve is a reference to a folder that does not exist. At first, I thought
that it was just a difference in the distributions (I'm using RPi2-3
V1.02beta - with simpleusb - but attempting to follow the instructions on
the latinovoip site). So I downloaded the latinovoip distro maintained by
KP4TR, unzipped it, loaded it on a fresh micro SSD card, and booted it. I
then went looking for the /etc/asterisk/local folder... but it does not
exist in that version, either. The /etc/asterisk/local folder is mentioned
a couple of times in the instructions on the latinovoip site...

J.



On Fri, Aug 26, 2016 at 4:51 PM, Roselito de los Reyes via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> John,
>
> Also, make sure the file that you're monitoring ie. PTTSTATE="/dev/shm/~pttstate"
> is in the right folder. the Latinovoip version is located in /tmp
>
> 73
>
> Lito KI9H
>
> ------------------------------
> To: arm-allstar at hamvoip.org
> Date: Fri, 26 Aug 2016 14:44:05 -0700
> Subject: Re: [arm-allstar] Fan Control Using URI (or RIM) I/O
> From: arm-allstar at hamvoip.org
> CC: tolitski at hotmail.com
>
> my mistake .. it looks like you DO have to make changes to your rpt.conf
> file to create the /dev/shm/~pttstate file.
>
> Lito
>
> ------------------------------
> To: arm-allstar at hamvoip.org
> Date: Fri, 26 Aug 2016 14:42:40 -0700
> Subject: Re: [arm-allstar] Fan Control Using URI (or RIM) I/O
> From: arm-allstar at hamvoip.org
> CC: tolitski at hotmail.com
>
> John,
>
> the k0kn version refers to an old code from the Acid release. it looks
> like a file is generated whenever the PTT is pressed and that is what
> K0KN's code is looking for. I don't think this is valid with the HamVOIP
> code. I could be wrong.
>
> 73,
>
> Lito KI9H
>
> ------------------------------
> Date: Fri, 26 Aug 2016 16:01:08 -0500
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Fan Control Using URI (or RIM) I/O
> From: arm-allstar at hamvoip.org
> CC: wb5nfc at gmail.com
>
> Can anyone point me in the direction of documentation on how to set up a
> node radio cooling fan using an I/O port on a URI or RIM? I don't want to
> use a temperature sensor.
>
> I've found the K0KN script (http://www.qsl.net/k0kn/txfan), but I'm not
> having any luck making it work. I've looked through the How To's on the ARM
> Allstar site, but I'm only finding info for using USB with a FTDI chip.
> Thought I could figure it out with info from http://latinovoip.net/
> allstar-and-the-gpio-fan-script-for-dmk-engineering-uri/  but I'm not
> having any luck with that information either. Suggestions appreciated....
>
> John
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-
> bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page -
> http://hamvoip.org
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-
> bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page -
> http://hamvoip.org
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-
> bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page -
> http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160826/90c53980/attachment.html>