[arm-allstar] Fan Control Using URI (or RIM) I/O

[Roselito de los Reyes]

John,
the k0kn version refers to an old code from the Acid release. it looks like a file is generated whenever the PTT is pressed and that is what K0KN's code is looking for. I don't think this is valid with the HamVOIP code. I could be wrong.
73,
Lito KI9H

Date: Fri, 26 Aug 2016 16:01:08 -0500
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Fan Control Using URI (or RIM) I/O
From: arm-allstar at hamvoip.org
CC: wb5nfc at gmail.com

Can anyone point me in the direction of documentation on how to set up a node radio cooling fan using an I/O port on a URI or RIM? I don't want to use a temperature sensor.
I've found the K0KN script (http://www.qsl.net/k0kn/txfan), but I'm not having any luck making it work. I've looked through the How To's on the ARM Allstar site, but I'm only finding info for using USB with a FTDI chip. Thought I could figure it out with info from http://latinovoip.net/allstar-and-the-gpio-fan-script-for-dmk-engineering-uri/  but I'm not having any luck with that information either. Suggestions appreciated....
John 

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160826/4a7dfb14/attachment.html>