[arm-allstar] arm-allstar Digest, Vol 27, Issue 39
Pete Fierro
mrpjf150 at gmail.com
Thu Aug 25 13:22:54 EST 2016
Thanks N5ZUA...Thats what I was looking for..
On Thu, Aug 25, 2016 at 1:00 PM, <arm-allstar-request at hamvoip.org> wrote:
> Send arm-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
> 1. Re: Repeater wont identify (Doug Crompton)
> 2. Re: Repeater wont identify (Steve Agee)
> 3. Re: Repeater wont identify (George Csahanin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 24 Aug 2016 23:52:10 -0400
> From: Doug Crompton <doug at crompton.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Repeater wont identify
> Message-ID: <BLU171-W1365CA389EF3D7F2195261DBAED0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Pete,
>
> I have no idea what you are asking - find straight line?
>
> The two ID lines you show below have semicolons ';' at the beginning of
> the lines that means they would not be executed. Remove the semicolons and
> reboot.
> As shown below without the semicolons it would play your voice ID and CW
> ID when you keyed up over the voice ID. That is assuming the KD2ARB file
> was in that directory and playable. The setup stores the ID files in
> /etc/asterisk/local/node-id.ul You can change the file there and not
> have to change anything in rpt.conf after setup. The node-id file can be
> any asterisk valid type. .ul, .gsm, etc.
>
> If you need more explanation then catch me on the air.
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
> Date: Wed, 24 Aug 2016 22:59:43 -0400
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Repeater wont identify
> From: arm-allstar at hamvoip.org
> CC: mrpjf150 at gmail.com
>
> Hello
>
> Made an error here regarding some files.in the rpt.conf files,I see
> the following list here.
>
> callerid ="Repeater" <0000043315> ; callerid
> for phone calls
> ;idrecording=/var/lib/asterisk/sounds/KD2ARB;Voice ID
>
> ;idtalkover = |iDEKD2ARB/R
>
> Cannot find that straight line on the keyboard that goes up&down next
> to idkd2arb.How do I correct this?..Thanks Pete
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
> attachments/20160824/212772bc/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 25 Aug 2016 00:11:10 -0500
> From: Steve Agee <n5zua at earthlink.net>
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Repeater wont identify
> Message-ID: <b1c9ae38-515f-0102-57fd-9f387bc0f046 at earthlink.net>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> It is known as a "pipe" character and you might find it by holding down
> the SHIFT key while striking the \ key.
>
> N5ZUA
>
> On 8/24/2016 9:59 PM, Pete Fierro via arm-allstar wrote:
> > Hello
> >
> > Made an error here regarding some files.in <http://files.in> the
> > rpt.conf files,I see the following list here.
> >
> > callerid ="Repeater" <0000043315> ; callerid
> > for phone calls
> > ;idrecording=/var/lib/asterisk/sounds/KD2ARB;Voice ID
> >
> > ;idtalkover = |iDEKD2ARB/R
> >
> > Cannot find that straight line on the keyboard that goes up&down
> > next to idkd2arb.How do I correct this?..Thanks Pete
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
> attachments/20160825/41e2f22e/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 25 Aug 2016 07:20:28 -0400
> From: George Csahanin <george at dyb.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Repeater wont identify
> Message-ID: <365d0322-2df4-2517-a394-531648d647d0 at dyb.com>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Think he means the "bar" | right above backslash
>
>
> On 8/24/2016 11:52 PM, Doug Crompton via arm-allstar wrote:
> > Pete,
> >
> > I have no idea what you are asking - find straight line?
> >
> > The two ID lines you show below have semicolons ';' at the beginning
> > of the lines that means they would not be executed. Remove the
> > semicolons and reboot.
> >
> > As shown below without the semicolons it would play your voice ID and
> > CW ID when you keyed up over the voice ID. That is assuming the KD2ARB
> > file was in that directory and playable. The setup stores the ID files
> > in /etc/asterisk/local/node-id.ul You can change the file there and
> > not have to change anything in rpt.conf after setup. The node-id file
> > can be any asterisk valid type. .ul, .gsm, etc.
> >
> > If you need more explanation then catch me on the air.
> >
> > *73 Doug
> > WA3DSP
> > http://www.crompton.com/hamradio*
> >
> >
> > ------------------------------------------------------------------------
> > Date: Wed, 24 Aug 2016 22:59:43 -0400
> > To: arm-allstar at hamvoip.org
> > Subject: [arm-allstar] Repeater wont identify
> > From: arm-allstar at hamvoip.org
> > CC: mrpjf150 at gmail.com
> >
> > Hello
> >
> > Made an error here regarding some files.in <http://files.in> the
> > rpt.conf files,I see the following list here.
> >
> > callerid ="Repeater" <0000043315> ; callerid
> > for phone calls
> > ;idrecording=/var/lib/asterisk/sounds/KD2ARB;Voice ID
> >
> > ;idtalkover = |iDEKD2ARB/R
> >
> > Cannot find that straight line on the keyboard that goes up&down
> > next to idkd2arb.How do I correct this?..Thanks Pete
> >
> > _______________________________________________ arm-allstar mailing
> > list arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit
> > the BBB and RPi2 web page - http://hamvoip.org
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
> attachments/20160825/3a932ba3/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of arm-allstar Digest, Vol 27, Issue 39
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160825/b9ba1cc8/attachment.html>
More information about the arm-allstar
mailing list