[arm-allstar] Voice beacon

[Doug Crompton]

Turning telemetry off does not stop the ID.  If you just want CW id then comment out the voice ID in rpt.conf - idrecording= ...  (put a semicolon before it) and just have idrecording=|iDE WA3XYZ/L  - of course with whatever call you are using. You would probably want to set  idtalkover=  with the same thing.  Then you should just have CWID.  Having no ID would not be legal.

Is it just the voice ID or something else that is going out you don't want?  
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 12 Sep 2015 22:18:28 -0400
From: N1XBM at amsat.org
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Voice beacon

I'm not really sure where to look. I'm converting my simplex node over to a link radio into a repeater. It's the same band so the radio can stay. 
I've changed:

dueplex=1 to =0 in rpt.conf
My simplex node would play a voice announcement that said my call, town, and state. Seemed like every ten minutes regardless of activity. I looked at beacon and that =0. I'd like to turn this off and only have my link radio ID to make the FCC happy.
I've also already have the telemetry all turned off on telemdefault and holdtelem when I was running a simplex node
I don't want my link doing all the bleeps and bloops. I just want it to take the traffic from the interwebs send it to the repeater and anything the repeater does to go down the information super highway.
Thank you 

N1XBM

Apparare Scientor

Paratus Communicare

Allstar Node # 27086, 41540, 41812, 42086

    

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150912/6a1797de/attachment.html>