[arm-allstar] Zoiper IOS version

[Mike / W5JR]

Neil, I found the best way to troubleshoot my setup was to put the server into CLI mode. Then I could see what the server was balking at and address that issue. I did have the registration error (29) among others. On the CLI, it was obvious that the client username and/or password did not match what was in iax.conf. 

The quick "no context/extension" error (3) proved to be trying to access an invalid node on the server profile selected in the client. 

Once all of this got sorted out, I can now access all of the multiple nodes on my ACID PC as well as the individual nodes on each of the BBB units. And do it from the local wifi or when out and about via the public IP. 

The only bummer is the mute in Zoiper is easy to become unmuted and you may not realize it right away. 

tnx
Mike / W5JR
Alpharetta GA

> On Sep 10, 2015, at 4:26 PM, Neil k8it <k8it at cac.net> wrote:
> 
> It was suggested that I first try my internal ip address over wifi.
> I tried it two ways. First I used my internal node address with port 4569
> then I tried my internal gateway address with port 4569
> Nothing works!
> I triple checked the entries in iax.conf and extensions.conf
> I still get registration error 29
> What does error 29 mean?
> has anybody got this to work on their iphone?
>  
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> WIRES-X K8IT 11479 Room 21479
> 
> From: Neil k8it
> Sent: Thursday, September 10, 2015 12:41 AM
> To: ARM Allstar
> Subject: Zoiper IOS version
> 
> I followed Doug's howto document to install the Zoiper app to connect to my node
> with the smartphone wifi turned off which forces the data to go to my verizon data plan and using the correct external ip and iax port number, etc. etc.
>  it will not register
>  
> The only difference I found in the instructions from the phone is that there is no save settings, as when you press register they seemed to be saved. I did all the edits to iax.conf and extensions.conf then rebooted the node.
>  
> Any thoughts on what might be wrong?
>  
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> WIRES-X K8IT 11479 Room 21479
> 
>  
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150910/da5a3dd0/attachment.html>