[arm-allstar] BF888 howto update

[Doug Crompton]

Neil,

It looks OK here.  I did not redo the entire page but rather said "see update below" at the disassembly phase. Under update you will see a new photo and instructions not to remove the board.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Wed, 28 Oct 2015 17:22:00 -0400
Subject: Re: [arm-allstar] BF888 howto update








Doug, please check to see if the photo from Fritz was posted correctly. I 
refreshed my browser but still find an older photo with the old remove screws 
and wire to COS on other side of pcb
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 
KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink 
K8IT-L
WIRES-X K8IT 11479 Room 21479




From: Doug Crompton 
Sent: Wednesday, October 28, 2015 3:43 PM
To: arm-allstar at hamvoip.org 
Subject: [arm-allstar] BF888 howto update


The BF888 makes a nice 
simple node radio but the mod can be a little heavy for some. Frits, W1FVB sent 
me a photo showing the connection for COS on the solder side of the board. This 
greatly simplifies the modification. I have updated the BF888 howto at 
hamvoip.org to reflect this change.

Direct link:

http://crompton.com/hamradio/baofeng888/

73 Doug
WA3DSP
http://www.crompton.com/hamradio






_______________________________________________

arm-allstar 
mailing 
list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit 
the BBB and RPi2 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151028/415a1c34/attachment.html>