[arm-allstar] Yaesu DR-1X Interface

[Doug Crompton]

As I remember the ham I modified it for had tried the back connector and something did not work. I confirmed that again but I forget what didn't work. I am checking with the other ham and if I find anything out I will let you know. So in the end it was just easier to do the same mod as the DR1. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: kd0qcn at aecimo.org
Date: Mon, 30 Nov 2015 13:07:55 -0600
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Yaesu DR-1X Interface

Doug,
Thanks for the clarification, would you be so kind as to expand on the problems you had using the back connector?  I would like to be able to explain to the club why I need to do it the way you explained vs just using the back connector.
Thanks,Jeff KD0QCN 


On Nov 30, 2015, at 10:55 AM, Doug Crompton <doug at crompton.com> wrote:




Jeff,

 I did go on to modify a DR1X and found problems with using the back connector. I ended up modifying it the same way as the DR1 and it worked fine with Allstar as a controller. Doing it the way I show in the mod works on both the DR1 and DR1X.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
From: kd0qcn at aecimo.org
Date: Mon, 30 Nov 2015 08:32:10 -0600
Subject: Re: [arm-allstar] Yaesu DR-1X Interface


  
    
  
  
    Doug,

    

    I did read the howto on hamvoip.org.  I was really wanting to use
    the 15 pin connector on the back of the DR-1X.  You stated in the
    howto that you did not have access to the DR-1X and you were unsure
    of how to interface with that 15 pin.  That is what I'm trying to
    figure out as we are trying to avoid cutting into the main harness
    inside the repeater.  Really all I need is something as simple as
    pin 1 of URI to pin 2 of DR-1X etc...  I was hoping someone had done
    this already as I hate to re-invent the proverbial wheel.

    

    73,

    Jeff

    KD0QCN

    

    On 11/30/2015 1:42 AM, Doug Crompton
      wrote:

    
    
      
      Did you read the howto on the
          hamvoip.org web page?
        

        73 Doug

          WA3DSP

          http://www.crompton.com/hamradio

        

        

        > From: kd0qcn at aecimo.org

          > Date: Sun, 29 Nov 2015 23:57:48 -0600

          > To: arm-allstar at hamvoip.org

          > Subject: [arm-allstar] Yaesu DR-1X Interface

          > 

          > Hi All,

          > 

          > My club has put me in charge of setting up a RPi2 with
          Allstar and interface that with our DR-1X repeater using a DMK
          URI. The problem I am having is I am seeing some information
          on the DR-1 interface but not on the DR-1X. The DR-1X uses the
          15 pin plug on the back of the repeater. We are not concerned
          with keeping the digital side of the repeater at this point.
          Has anyone done this interface and might possibly have the
          schematic of how you did it, or even something as simple as
          what pins you used?

          > 

          > Thanks in advance for any help!

          > 

          > Jeff 

          > KD0QCN 

          > _______________________________________________

          > 

          > arm-allstar mailing list

          > arm-allstar at hamvoip.org

          >
          http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

          > 

          > Visit the BBB and RPi2 web page - http://hamvoip.org

          > 

        
      
      

      
      

      _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
    
    

  


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151130/c9f8d47a/attachment-0001.html>