[arm-allstar] Yaesu DR-1X Interface

[Sione Ragle]

Typo meant to say logic pin 

On November 29, 2015 10:41:01 PM PST, Sione Ragle <ke6sth at ke6sth.ampr.org> wrote:
>I done this with my DR-1X I don't have any drawings but you should just
>follow the guide that came with the repeater. Works fine just make sure
>you have the login pins on the DR-1X set for analog mode 
>
>On November 29, 2015 9:57:48 PM PST, Jeff Carlyle KD0QCN
><kd0qcn at aecimo.org> wrote:
>>Hi All,
>>
>>My club has put me in charge of setting up a RPi2 with Allstar and
>>interface that with our DR-1X repeater using a DMK URI.  The problem I
>>am having is I am seeing some information on the DR-1 interface but
>not
>>on the DR-1X. The DR-1X uses the 15 pin plug on the back of the
>>repeater. We are not concerned with keeping the digital side of the
>>repeater at this point. Has anyone done this interface and might
>>possibly have the schematic of how you did it, or even something as
>>simple as what pins you used?
>>
>>Thanks in advance for any help!
>>
>>Jeff 
>>KD0QCN 
>>_______________________________________________
>>
>>arm-allstar mailing list
>>arm-allstar at hamvoip.org
>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>Visit the BBB and RPi2 web page - http://hamvoip.org
>
>-- 
>Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
>------------------------------------------------------------------------
>
>_______________________________________________
>
>arm-allstar mailing list
>arm-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2 web page - http://hamvoip.org

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151129/e33b99d1/attachment.html>