[arm-allstar] Node connect announcement

[DAVID HARESNAPE]

Thank you Bob. 
The example provided willbe very helpful. 
I will try later and see how it works. 


Dave 
WB0OUE 

----- Original Message -----

From: "Robert A. Poff WB3AWJ" <wb3awj at comcast.net> 
To: "ARM Allstar" <arm-allstar at hamvoip.org> 
Sent: Tuesday, November 24, 2015 3:46:36 PM 
Subject: Re: [arm-allstar] Node connect announcement 



Here you go. 



In extensions.conf, you see the line like this : 

exten => XXXXX,1,rpt,XXXXX 

Where XXXXX is your node number. 



Replace that line with these three: 

exten => XXXXX,1,Playback(Whatever_The_File_Name_IS) ; Play Whatever_The_File_Name_IS.gsm to the remote station on inital connect 
exten => XXXXX,n,Wait(3) ; Make this value whatever you need to cover the length of the audio file 
exten => XXXXX,n,rpt,XXXXX ; Connect the remote station to app_rpt node XXXXX 



Since the remote station is not connected to app_rpt yet, it plays the file over the remote connection only. 

Of course if you're coming in from a node that already has other connections, everyone on that side will hear the message. 


Try connecting to 28260 for an example. 









Bob 

WB3AWJ 



_______________________________________________ 

arm-allstar mailing list 
arm-allstar at hamvoip.org 
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar 

Visit the BBB and RPi2 web page - http://hamvoip.org 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151124/ed5e54ae/attachment.html>