[arm-allstar] DTMF Code control

[Doug Crompton]

Yes,  Enable  -  COP,2   Disable -  COP,3

http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/allstar_functions.pdf

You would set up your own DTMF command mapped to this in rpt.conf

Example:

830=COP,2
831=COP,3

Then you would execute *830  to enable  and *831 to disable.  You could use any valid DTMF sequence you want.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Fri, 20 Nov 2015 12:24:07 -0600
From: txlawman at aol.com
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] DTMF Code control

Is there a dtmf code to toggle the node on and off? Enable/disable the node?

Brian
KC5YSM
Sent from my Verizon Wireless 4G LTE DROID
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151120/d25107f7/attachment.html>