[arm-allstar] ls nodes setup Raspberry Pi

[Doug Crompton]

Yes, lsnodes is pre-installed  on the BBB and RPi2 so all you have to do is browse to it.

http://ip_or_domain:port/cgi-bin/lsnodes_web?node=local_node_number

:port is optional - default 80. Use local IP on your LAN - domain or public IP outside your LAN. 

A typical local connection (LAN IP 192.168.1.100 and node 40000) would look like this:

http://192.168.1.100/cgi-bin/lsnodes_web?node=40000

The howto shows how to install it on acid if thats your thing.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sun, 15 Nov 2015 12:05:40 -0500
From: w2ymm1 at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] ls nodes setup Raspberry Pi

Turns out It was set to the default port of 80
and all my bookmarks were for another port I setup

Error on my part. 

nano /etc/httpd/conf/httpd.conf


Change from port 80 to my specified port.
Listen 80      
(Changed)
Saved file and exit

systemctl restart httpd 

Back in business

Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

On Sun, Nov 15, 2015 at 11:30 AM,  <jim.pilgram at gmail.com> wrote:
                                                                                      Look in the HOW-TO'S at hamvoip.org. Doug has a very simple write-up there. 
Aloha Jim NH6HI                                                                                                                                                                                                                                                                                                                                         Sent from my BlackBerry 10 smartphone on the Verizon Wireless 4G LTE network.                                                                                                                                                                                                                From: W2YMMSent: Sunday, November 15, 2015 05:36To: BeagleBone Black ARM AllstarReply To: ARM AllstarSubject: [arm-allstar] ls nodes setup Raspberry Pi
Hi all, I just did a fresh install of a Raspberry Pi node and I'm trying to
configure the ls nodes script, but can't seem to figure it out.
I thought in the past it was part there was an option to configure it
when you ran the initial install script.

It was working on my BBB which I just replace with this new Pi.
(new clean install, not from backup)
I set it up so long ago, I can't remember...
Any help would be greatly appreciated.
Thanks
Bob W2YMM
Allstar 28183,29973,40822,41899
Echolink 1224,21808
Irlp 4265,8883
Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

Allstar 28183,29973,40822,41899
Echolink 1224,21808
Irlp 4265,8883





_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org



_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151115/bdb139f1/attachment-0001.html>