[arm-allstar] multiple "pseudo node" remote radio control

[Sam Skolfield]

Hmm, I must have a typo somewhere then. As soon as I function my "third
node", asterisk crashes.
I will email you my rpt.conf and extensions.conf file in case you are
curious. Thanks!

On Sun, Mar 29, 2015 at 6:58 PM, Doug Crompton <doug at crompton.com> wrote:

> Sam,
>
>   You should be able to configure as many as you want with different node
> numbers of course. Just make another node stanza identical to the pseudo
> you have with the node number changed.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Sun, 29 Mar 2015 17:40:55 -0700
> From: kj6qfs at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] multiple "pseudo node" remote radio control
>
>
> Allow me to refine my question to the group.
>
> What is the proper way to configure more than one "pseudo" node? (a la the
> pseudo node that comes on the BBB config along with your personal node)
>
> From there, everything else should work.
>
> Thanks!
>
> On Sun, Mar 29, 2015 at 3:51 PM, Sam Skolfield <kj6qfs at gmail.com> wrote:
>
> Thank you, David.
>
> Yes, you are correct, I am successfully using the CI-V protocol to control
> one xcat via a dahdi pseudo node on a BBB with a USB-serial converter.
>
> I assume the same thing that you do; because the "ioport" definitions for
> respective hardwareTTY ports are on a node basis and not a global "server"
> basis.
>
> My problem might lie within my usage of multiple dahdi pseudo nodes.
>
> On Sun, Mar 29, 2015 at 2:07 AM, David McGough <kb4fxc at inttek.net> wrote:
>
>
> Hi Sam,
>
> I have never played with an Xcat interface board, but, it interfaces with
> the control computer via the Icom C-IV serial protocol, right?? If that is
> the case, I expect you could use multiple USB serial adapters and a USB
> hub for the hardware interface with the BBB. Then, use the hamlib tools
> (already installed in BBB firmware version 1.2.1 and later) as the
> software interface to communicate with C-IV. Minimally, the hamlib tools
> would provide you with a method to test the interfacing with the Xcat.
> Then, once you know that works, experiment with Asterisk remote-base
> control or, (preferably to me) setup DTMF macros to call hamlib and issue
> commands.
>
> Take a look at the "/usr/local/bin/rigctl" command, etc.
>
>
> 73, David KB4FXC
>
>
>
>
> On Sat, 28 Mar 2015, Sam Skolfield wrote:
>
> > Hello all,
> > I am playing with remote base frequency/PL control of two xcat-fitted
> > Syntor X radios. The goal of this project is to figure out how to
> > tune/control multiple frequency-agile radios using one BBB. Please note
> the
> > radio's audio stuff ISN'T interfaced. This project does not entail
> > interfacing multiple radios to a BBB, but instead using the BBB to
> control
> > multiple frequency-agile radios. I feel I am close, but I am fumbling in
> > the dark at this point.
> >
> > What I have is three nodes on my BBB. The first node is a main "repeater"
> > node that is normally connected to two "dahdi" pseudo nodes, both of
> which
> > are defined as separate remote bases nodes, with individual respective
> > "ioport" serial definitions. I can reliably control the xcat via the
> second
> > pseudo node, but the first one seems to crash asterisk when functioned.
> >
> > This could be a very cool and useful project. If you are interested, PM
> me
> > and we can do something like a TeamViewer session and play around.
> >
> > Thanks and 73!
> >
> >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
>
>
>
> --
> KJ6QFS
> Sam Skolfield
>
>
>
>
> --
> KJ6QFS
> Sam Skolfield
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>



-- 
KJ6QFS
Sam Skolfield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150329/28cc7f7d/attachment.html>