[arm-allstar] BF888S and RF Feedback

[Joe]

Hi Doug,
I have the BF888S but when transmitting, I am getting RF feedback. I suspect that’s what you meant by motorboating in your article. When you placed a .01uF cap, did you put it in series with the PTT line or parallel across PTT and ground? I assumed that the PTT line was a DC signal so I thought that the cap in series wouldn’t do anything. I have to run out to RS to get the cap but when I get back I hope to install it.

I got the URI, and the BBB all set up, just the RF feedback.
Thanks again.

73
Joe - AD2DX




This email communication and any files transmitted with it may contain confidential and or proprietary information and is provided for the use of the intended recipient only. Any review, retransmission or dissemination of this information by anyone other than the intended recipient is prohibited. If you receive this email in error, please contact the sender and delete this communication and any copies immediately. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150314/f7e0213f/attachment.html>