[arm-allstar] Defining Function - question for Tim Sawyer

[Doug Crompton]

Again there is a how-to on this on the web page - hamvoip.org  - I don't think people look at that first!

http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/allstar_functions.pdf

Keep in mind that some stock commands differ from Acid - specifically  *73 , *71 for permanent connect/disconnects  - *76 for all disconnect.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 17 Jun 2015 09:34:52 -0700
From: larry at thunderbolt.net
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Defining Function - question for Tim Sawyer


  

    
  
  
    First I would like to say thanks to you and other members for
    posting some of the setup configurations (with their function
    comments) Good learning tool for some of us.

    

    In one of your previous shares with the group [functions] "ilink.6"
    is listed twice. This was something I am unclear about. 

    Is the number defining a Function strictly a Decode # that can call
    any ilink function using multiple commands or is a particular ilink
    command controlled by the last number it is defined by?

    

    1=ilink,1
    2=ilink,2
    3=ilink,3
    4=ilink,4
    5=macro,1
    70=ilink,5
    71=ilink,6
    72=ilink,7
    73=ilink,15
    74=ilink,16
    75=ilink,8
    

    
    80=status,1
    81=status,2
    86=ilink,6        ;Disconnect all links
    

    Hope you understand that muddy question.

    Larry - N7FM
  


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150617/7c6c8622/attachment.html>