[arm-allstar] remote base node functioning question
Doug Crompton
doug at crompton.com
Wed Jun 17 07:34:36 EST 2015
Hamlib is pre-installed on the BBB and RPi2 images. There is a how-to at the hamvoip.org web page.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Wed, 17 Jun 2015 07:20:41 -0400
From: sam.nabkey at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] remote base node functioning question
That's cool. Care to share some setup examples? I'd love to see them.
K8SN
On Jun 17, 2015 6:51 AM, "David McGough" <kb4fxc at inttek.net> wrote:
Hi Sam,
I'm guessing that you're trying to use the built-in remote-base code in
app_rpt?? If so, the only thing I can suggest at this point is to use
hamlib (the "rigctl" program), instead of the built-in code.
I use hamlib for several radios hosted by BBB's, etc., and it works
perfectly for me.
73, David KB4FXC
On Wed, 17 Jun 2015, Sam Skolfield wrote:
> Really too bad, I'm so close to success with what is obviously one of very
> few attempts at a frequency-agile BBB node. Looking at the console with any
> level of verbosity doesn't seem to reveal any useful information.
> Unfortunately, it doesn't look like I'll be able to fix this any time soon.
>
>
> On Tue, Jun 16, 2015 at 2:50 PM, Sam Nabkey <sam.nabkey at gmail.com> wrote:
>
> > I wish I had time and more knowledge. ..
> >
> > It's fun to try and figure it all out. .
> > On Jun 16, 2015 5:06 PM, "Sam Skolfield" <kj6qfs at gmail.com> wrote:
> >
> >> Hi Sam!
> >> That's frustrating! Perhaps someone can help us fix this bug? There has
> >> to be more people that want to use frequency agile remote bases than just
> >> the two Sams....
> >>
> >> On Tue, Jun 16, 2015 at 8:05 AM, Sam Nabkey <sam.nabkey at gmail.com> wrote:
> >>
> >>> This is one of the same issues I experienced with the bbb code. The cli
> >>> will be blowing can't hang up errors at you while this is going on. My
> >>> only recourse was to reboot.
> >>>
> >>> I went to an acid version before the changes were made to the channel
> >>> drivers that was "fixed" to work reliably on the bbb to get my remote to
> >>> work.
> >>>
> >>> Sam K8SN
> >>> On Jun 16, 2015 8:04 AM, "Sam Skolfield" <kj6qfs at gmail.com> wrote:
> >>>
> >>>> David, I'm using a *1 xxxx (xxxx being the node)
> >>>>
> >>>> _______________________________________________
> >>>>
> >>>> arm-allstar mailing list
> >>>> arm-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB web page -
> >>>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >>>>
> >>>
> >>> _______________________________________________
> >>>
> >>> arm-allstar mailing list
> >>> arm-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB web page -
> >>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >>>
> >>
> >>
> >>
> >> --
> >> KJ6QFS
> >> Sam Skolfield
> >>
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB web page -
> >> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >>
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB web page -
> > http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >
>
>
>
>
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150617/4385592d/attachment.html>
More information about the arm-allstar
mailing list