[arm-allstar] Bug with current SVN of app_rpt.

[David McGough]

Hi Jonathon,

You've hit one of several bugs in the current SVN version of 
chan_simpleusb, when used on BBB's and/or RPi2's.

73, David KB4FXC



On Tue, 9 Jun 2015, Jonathan Merwin wrote:

> I'm not sure if this belongs here, or over at the app_rpt list.  But I've noticed a bug with the current SVN version of app_rpt on the Raspberry Pi 2 V1.0 Allstar system.
> 
> Initial setup is fine, everything is working well.  When I download the current SVN of app_rpt, complie and install it, I run into a bug.  I'm using the Raspberry Pi 2 version B with a DMK URIx.
> 
> After installation of the current SVN version of app_rpt, upon reboot, Asterisk/app_rpt will start as normal, I hear my repeater's ID, nodes connected, courtesy and function tones, etc.  It will repeat, all seems to be functioning normally... But after about a minute app_rpt throws an "HID thread died or something!!" error and starts flooding the Asterisk CLI screen with "can't detach usb device" errors from chan_usbradio.  At this point my URIx starts slow flashing.  Asterisk/app_rpt will no longer output any audio, it will not repeat, nothing.
> 
> Weird part is, if I call astres.sh, Asterisk/app_rpt will restart and work as normal, and it doesn't throw the HID error.  It only does this on a cold boot, after losing power, etc.
> 
> Has anyone else encountered this?
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>