[arm-allstar] Port Forwarding the BBB

[Doug Crompton]

Bob,

There is nothing unique about the BBB or RPi2 as far as port forwarding is concerned. The only thing to consider is if you have the firewall turned on in the BBB or RPi2 and you are using other than the standard ssh port (222) then it won't work unless you modify the firewall definitions to the new port.  It is NOT necessary to run a firewall on the BBB or RPi2 in most situations where you have a router upstream. So if you are in that situation and you have it turned on then turn it off.

Are you using the standard ssh port 222?   if so you port forward 222 tcp to the ip address of your BBB. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: kk6ecm at gmail.com
> Date: Mon, 8 Jun 2015 16:17:04 -0700
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Port Forwarding the BBB
> 
> I've setup a BBB, along with other nodes behind the same router, which I can access from behind the firewall, all via ssh, but cannot reach the BBB externally. The other nodes (ACID and Pickle) port forward just fine, and I can reach them externally. The BBB nodes register with Allstar just fine, as do the others (search on kk6ecm to see them). I have resetup the BBB, to no avail. Any ideas? I have the latest version of software.
> 
> Thanks,
> Bob
> kk6ecm
> 
> Sent from iPad
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150608/4a0fe7de/attachment.html>