[arm-allstar] New HAM need help with DTMF
Jon Rorke
jrorke at cogeco.ca
Mon Jul 27 13:23:57 EST 2015
Check to see if the node is seeing the cor from your radio. If not then
it will not read DTMF.
Also maybe set rx boot =1 (yes). if the rx audio is too low then tones
wont decode.
On 7/27/2015 2:09 PM, Sam Bonsett wrote:
> Ok I bumped it up to 650 and it works on my Baofeng but does not work
> with my Yaesu FT-60. (might be low battery?)
>
> Will set the duplex to 1
>
> Thanks Doug!
>
>
>
> On Mon, Jul 27, 2015 at 1:46 PM, Sam Bonsett <bonsett at gmail.com
> <mailto:bonsett at gmail.com>> wrote:
>
> yes that works but that is how I have been connecting to nodes...
> Actually I use this:
> rpt cmd 42197 ilink 3 42181
>
> What I want to do is connect to a node from my HT.
>
> on HT *342181 should connect me to node 42181 but it does not.
>
> Sam
> km4ksr
>
>
>
> On Mon, Jul 27, 2015 at 1:35 PM, Robert Newberry <N1XBM at amsat.org
> <mailto:N1XBM at amsat.org>> wrote:
>
> Try this.
>
> Log into your box.
>
> Type asterisk -r
> Then once in CLI type rpt fun (your node number) *342181
>
> Where I put parentheses please supply your nodes number
> without parentheses.
>
> Tell us if that works!
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150727/484bb66d/attachment-0001.html>
More information about the arm-allstar
mailing list