[arm-allstar] raspberry pi audio level question

[Doug Crompton]

The tts_audio.sh script in the RPi2 code has a volume level. The default is 3 if no level is given. Levels can go from 1 to 10

tts_audio.sh -v 5 myid.txt   ; convert myid.txt to voice at level 5.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: n3fe at repeater.net
Date: Tue, 14 Jul 2015 16:39:26 -0400
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] raspberry pi audio level question

If I remember correctly the google voice is already set a little lower than full.  If that is the case then your input audio must be to low and you are compensating for it with your transmit audio.

Corey
On Jul 14, 2015, at 4:25 PM, Neil k8it <k8it at cac.net> wrote:








just built a raspberry pi node and its working great. I used 
simpleusb-tune-menu and set all the levels. however the spoken computer voices, 
ids, text to speech etc all have too much audio.
is there a parameter to globally reduce the spoken audio levels without 
reducing the transmit audio levels feeding the radio as received audio levels 
are ok.
 
 
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 
KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink 
K8IT-L




 
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150714/5df00886/attachment.html>